Jump to content

The Colonel

Members
  • Content Count

    156
  • Joined

  • Last visited

5 Followers

About The Colonel

  • Rank
    lower branch munkey

Profile Information

  • Gender
    Male
  • Location
    Florence, Italy
  1. Packages frome EVGA Look inside here is the Z170 Classified 4Way but I'm going to change it with X99 Classified And only 3 TITAN X SC...... 'm waiting for the 4° TITANs ATTACK coming soon...
  2. Project Upgrade to Version 2.0 on the front page
  3. Thanks Bro! :D Said it by the best Italian Modders I'm very pleased ;) You know also that you have reawakened my sleeping monkey with your Twister Mod 8.0.0.D with the illuminated plane
  4. COMING SOON...... HW up-grade From EVGA X79 Dark Classified to EVGA X99 CLASSIFIED With BITSPOWER WBs From 4 SLI EVGA 780ti Classified K|NGP|N to 4 SLI EVGA TITAN X SUPERCLOCKED
  5. Then I put the anticyclone inside the Tank Exactly what I had thought, besides the measures are designed to be compatible with the mod that I will do outside the Tank. Add some water As you know I wanted to use 2 Tanks, but then I decided I put them outside and so I think ....... WHY DON'T USE 4 TANKs!
  6. I'm working on a project dedicated to BITSPOWER's Tanks, Dangerous Tanks (sorry theatricality) that I carry with friends of Extreme Modding Factory, in July and August I and my friend C3r34L3 were busy and we were unable to meet , so I studied and made further modification to this project to be inserted inside, I thank my friend Danilo and his laser Now put the EK logo inside a tank is pretty easy, but put the Bitspower logo is a bit 'more complex, given the size and the various details you need a laser and the design still has to be slightly modified, as we discovered. As mentioned before we did some test, because I wanted to see my ideas in real (sometimes they are unrealizable) A version only engraved, not just the effect I wanted And a perforated version first version with too small details, the laser has detached them second version with larger details but very close, the result was not perfect, too fragile lastly changing a bit 'design I got the desired result Notice the size And here is the version installed on his base
  7. I am happy to announce that a new SPONSOR decided to participate in the realization of my Project! I wish to thank DEMCiflex Computers and Electronics Dust filters and in particular Roxannefor the support And I have a lots Fan Grids ...... I'm very happy because these, for me, are the best products!
  8. Buddy you are saying that you are Modding the Air Cooling Module of Corsair?
  9. Finishing touches on the extensions cover for the fans opening a clean Quick installation and verification As mentioned I do largest grids and here is the mounting. The two side grids And the Top
  10. Once again I thank my new sponsors CORSAIR, and Jon Gerow for his support, they have posted the new RAM DDR4, as usual, for me, Corsair Platinum, the BEST RAM of EVER: Memory Kit C15 DRAM DDR4 3000MHz 32GB (4 x 8GB) Dominator Platinum Series (CMD32GX4M4B3000C15) After years is a real satisfaction for me have Corsair as Sponsor . Let go the unboxing, the kit that Corsair sent me is of 32GBs and equipped with air cooling. It features a beautiful box, but the most important thing is that the modules are Platinum of 8GBs (faster than Corsair do), so I'm free to upgrade to 64 GBs Here the air cooling module And RAM Modules Ilike these things ..... NOW starts the upgrade to X99
  11. Good job Bro, I like the your work on case ! ;) And Icemodz is awesome ! Follow :)
  12. Another reason for which I did the Tanks extensions is that I will use 2 PSU, 2 LEPA G-1600W. However these remain inside the case and are not accessible, so I will use sockets with on-off button. Initially I wanted to place the PSUs under the Cooling Towers, but the space was little and remained under the RADs, thing I didn't like at all, but now I have much more space, the plug is next to the PSU and not under the RADs. Here is below the case and positioning I then made metal extensions covers, that then I'll wrap. I did 4 panels to size. I have bent them Some tests with the Tanks of Bitspower positioning higher and lower ù I fasten the cover extensions and the socket panel The fan bocks that are inside the 900D were a bit covered by grids, about 25mm per side, thanks to the extension I can overcome this problem, I have "only" widen these grids, that is remake them. Top case and lower lateral blocks Test on the case
  13. The Colonel

    ESKIMOD

    ;) FOLLOW :) Great use of your Printer ! Awesome ideas !
  14. Meanwhile also arrived the new Red Carbon Fiber film of HEXIS for the fans ducts. I ordered it in Nederland, the previous film hadn't satisfied me for the low quality, this costs about ten times more but the difference can be seen. It's of the same quality of 3M if not better, with real 3D effect to the touch CORSAIR NEW SPONSOR for Project 900D Monster Xtreme I'm finally VERY HAPPY to announce a new sponsorNEW SPONSOR for the new version of my Project, I want to thank CORSAIR and Jon for their support and for the RAM DDR4 send me Dominator Platinum Series 32GB (4 x 8GB) DDR4 DRAM 3000MHz C15 Memory Kit (CMD32GX4M4B3000C15) Umboxing Comining soon.....
×
×
  • Create New...