Jump to content

Willy Dijo

Members
  • Content Count

    61
  • Joined

  • Last visited

  • Days Won

    3

Willy Dijo last won the day on January 12 2017

Willy Dijo had the most liked content!

About Willy Dijo

  • Rank
    Member

Contact Methods

  • Website URL
    http://willydijo.com/

Profile Information

  • Gender
    Male
  • Location
    Australia

Recent Profile Visitors

1368 profile views
  1. Its done! Flat pack picture of the case. All the surfaces sanded smooth. A couple of hardware shots while transferring. Thanks to everyone that followed and commented on this log, If you haven't already make sure to check out my instagram page @willydijo , its where I'm most active.
  2. I've made a fair bit of progress since last. A lot of sawing, filing and the edges sanded smooth. Drilled perforation holes for the PSU to breathe. Made a basement wall as well as a bottom panel. Painting is up next.
  3. Finished most of the fitment of the case, after this its sawing and filing the designs. I love this tiny SFX PSU, I've been wanting one for a while and I'll be using it in a lot of future builds.
  4. WD Crimson Description This is my current scratch build project "WD Crimson", it's an inverted 90 degree motherboard design that uses an ATX motherboard, SFX PSU and 240mm CPU cooler displaying its hardware in a unique way while also with an emphasis on space efficiency, dimensions being 403mm Long x 385mm High 210mm Wide. Specs i5 6600K GTX 1070 EVGA FTW Z170 EVGA FTW 16GB EVGA RAM Silverstone SFX 600W PSU Thermaltake RIING 140 and 120mm Fans Corsair H100i GTX 3Tb WD Red and 120GB Intel 535 SSD ______________________________________________________________________ So far I have Completed the designs, cut the lengths, filed the lengths, and scribed the markings. I'm currently drilling pilot holes at 3/32". Next up is tapping then test assemble. I'd Love to hear your input on the build.
  5. Yeah, I used a paint I hadn't yet tried and I don't think I will be using it again. Thank you to everyone that followed and commented on the build, it made the process all the better! The build is now complete, and I have just finished assembling the system. Cable management in this build turned out to be quite a challenge but worth it in the end, I also like that the PSU is half the length of the case. Here is a HD Imgur album link for the above pictures http://imgur.com/a/QBVi1 If you want to keep up with my builds and projects I'm at; Instagram @WillyDijo Facebook WillyDijo Twitter @WillyDijo
  6. Thanks guys. Yes, all the holes have been punched before drilling. Since last update I have been painting the cases aluminium. I had quite a setback in that I used "Paint + Primer" paint and after I finished the paint then started to assemble the case I found the paint did not stick to the aluminium, and I had to scrape, thinners and sand all the paint off and start again. Ford Octane Orange is the orange I'm using and also flat black. I've still got a bit of paintwork to touch up, then its build photos.
  7. For me I'd say the best tech thing this year was the latest generation of GPU's, the GTX 1070 bringing Titan X performance at a much lower price, and also the RX 480 bringing R9 290X performance to a more entry level price. As for bad, I too would say the trend of RGB, RGB to me should be used like the blank tile in scrabble, a changeable coloured component to easily match your builds set colour scheme, and not rainbow swirls.
  8. I just finished making the GPU mount and acrylic panels for the case. This is a guide that came in handy with stopping the drill bit walking from the marking. I found a easy way of doing these kinds of cuts, First scribe a line along the longest part, then use a coping saw to cut the shorter lengths then snap and file, this saved a lot of time especially when cutting the air intakes. Drilled a spot for the power button, its at the rear above the motherboard IO. Nearing complete, next up is paint.
  9. Thanks Mos! I've made the two pieces for the basement and it makes it look a whole lot more complete. Thanks Bill, that means so very much to me! I've been working on sleeving my sleeved cable extensions. Then the parts arrived, It felt like Christmas again. The best part about these components is that they have neutral colours and will work great with the orange without needing to paint. The case is not at all far from complete, and there will be another update shortly. Fun fact, a 900D side panel makes for a good photo backdrop.
  10. Since last update I have been working on the rear panel and filing more of the case. Each hole was 7mm apart and later drilled to 1/4 inch. Next up is making the acrylic side panels and basement divide.
  11. Work has been done on the front plate. I marked out the design the same way as i did with the XOI build by tracing over an iPad,and I realised after I could have printed out the logo instead, It worked out either way. Next up is making the rear panel.
  12. Since last update I have sawed and filed designs into all the right angle aluminium.The lengths were sawed close to the scribe lines, then rough filed, then fine filed, then sanded smooth.I like how clean this fan grill area turned out, too bad it wont be seen.The H100i's tubing looks real nice but they are a bit of a hassle to work with.Next up is making the 3mm aluminium front and back plates.
  13. "WD Tyrant" Description This case is designed to make a M-ITX sized system using ATX components, the overall case dimensions being 385mm Tall x 416mm Long x 206mm Wide. The cases construction is mainly 3mm thick plate and angle aluminium, with acrylic windows and basement divides. This case houses an ATX motherboard, <325mm long GPU, ATX PSU, 1x 3.5" drive, 1x SSD, 240mm AIO CPU cooler, 120mm exhaust fan and 2x 140mm Intake fans. Part List i5 6600K Z170 EVGA Classified K GTX 980ti EVGA Classified 16GB EVGA Superclocked 2666 DDR4 1000W EVGA SuperNOVA G1 PSU Corsair H100i GTX 3x Thermaltake RIING 120 2x Thermaltake RIING 140 Western Digital Red 3TB Intel 535 120GB SSD _________________________________________________________________________________________________________________________________________ I've finished drawing out all the measurements for the case, it took longer than it should have because I added 10mm of width to make sure there were no clearance issues with the USB headers and PCI slots. Then i got to sawing all the various sized 1m long angle aluminium. All the lengths filed to their size and ready for scribing. _________________________________________________________________________________________________________________________________________ Since last update I've been tapping M5 threads. The case still needs a few parts filed before they will fit. Next up is filing the designs into the angle aluminium.
×
×
  • Create New...