Jump to content

DDCustomMods

Members
  • Content Count

    101
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by DDCustomMods

  1. PCPartPicker Link: https://pcpartpicker.com/list/pkKk29 Hey all! I had a couple minutes last night so I took a picture of the car’s bumper and recreated the lettering. Now the design is really coming together!!!
  2. PCPartPicker Link: https://pcpartpicker.com/list/pkKk29 Goood afternoon my fellow PC nuts and Luder lovers! First, let’s get some love for a bath for #AcidDragon as she sits in the driveway Now that we know what we are working towards….. Let’s start changing this Thermaltake Commander C34 case! First let’s get this front panel off by using a gentle prying motion with a flat screwdriver to release the 4 clips Those 200mm of RGB goodness (Thermaltake included front intake fans) Now we can get the grills removed and get them painted green to match the grill on #AcidDragon A tip for painting outside, cover with a clear tub/container to prevent dust, leaves, bugs and anything else floating around while the paint dries Always several super light coats for the win! While I waited for the paint to cure, I began unboxing hardware and getting it installed to test fit and prep the system to plan out our loop and placement of the “turbo” pump. Starting with this sexy EVGA Z390 FTW motherboard…and fitting the Thermaltake Pacific CPU cooler to it Next up our 120GB TeamGroup SSD! Finally, let’s install this Thermaltake ToughPower 850W PSU! A bit overpowered for this build’s purpose…. But so is the watercooling haha The paint hasn’t fully cured, but now is dry and can be installed back in place! The case is looking sexy so far! Hopefully I will have time to get some more work this Friday and have another update for you next week!!! Stay classy fellow modders and friends!!!
  3. PCPartPicker Link: https://pcpartpicker.com/list/pkKk29 What is up my friends and fellow PC gurus! Just wanted to take a post to give a huge thanks to our sponsors! First off, we have Thermaltake who has been gracious enough to send not only the Commander 34 case, but all the watercooling gear we need and the power to make it all work. Moving on, we come to EVGA. They were kind enough to send over a EVGA GeForce GTX 1070 to go with our EVGA FTW Z390 board. Third, we come to our partners over at ModMyMods! They are sending us a Alphacool block for the 1070 and some misc modding materials and cables. And last but certainly not least, we are proud to announce that ArtMods will be providing the cruicial 3D printed parts to make this build a reality! Am super excited as he is an incredible fabricator and can paint realistic designs on almost anything! In other news, below are two video links. The first is our hardware reveal for the mod and the second is our case review on the Commander C34 case! Don’t forget to sub to the channel to not miss out on the other reviews coming soon. #PreludePC Hardware Reveal(Well...most of it) https://www.youtube.com/watch?v=Rn_N3yAcxaU Thermaltake Commander C34 Case Review https://youtu.be/MVJv9P4pvb4 (Video goes live June 19th at Noon PST) Thanks for sticking with us so far! Can’t wait to get you more content soon!
  4. PCPartPicker Link: https://pcpartpicker.com/list/d9JGpG What is up my fellow modders! Let me introduce you to our next project Node Zero! BACKGROUND Node Zero was conceptualized as our move back home on the west coast meant leaving our staircase server hub back in Tennessee. Now that I’ve been back home in NV for the past year, I have been missing not only our PLEX and Gaming servers, but our backups and our RAID 5 system. Because of this, I started brainstorming a new case to house our server hardware, something that could handle many HDDs. After searching around, I just didn’t like what I saw and didn’t want to go slim server rack(and of course money issues prevents a couple grand for a server) So we are replacing this case with a Nanoxia Rexgear Hydra 2 Mining case, and modding it to accept up to 12 HDDs and an SSD or two. OLD SERVER CASE HYDRA 2 CONCEPT HYDRA 2 CASE(Stock Photos) Here in this YouTube video we unbox the Arctic cooling gear and the Nanoxia HDD bays. Also has hardware going into our Honda Prelude PC mod. https://youtu.be/xiwT1sEO_3Y Have a wonderful day and I hope you are excited as I am to see this build come together!!!
  5. PCPartPicker Link: https://pcpartpicker.com/list/pkKk29 Good to see you all again! We have begun our next mod!!!!! Are you as excited as I am? Let me know what you think and drop me a response below. BACKGROUND As someone who loves computer modding, I actually enjoy working on cars as well. My current project vehicle is a 2000 Honda Prelude. So naturally when I saw that Thermaltake’s new Commander 34 case looks like the honda emblem, I knew what I had to do. I’m here to present to you our latest sponsored build, “Prelude PC” BUILD PLAN In regards to modding the case itself, we won’t be doing too much other than making the cooling components work. However with some creative 3D printing, vinyl work and paint. We plan on dropping a system into the case that will be recognizable to any Honda enthusiast. 3D Prints H22A Engine Turbo Pump Cover Honda Emblem Prelude badge Oil Catch Can PARTS ARRIVING!! Unboxing video of some of our sponsored parts! 2 separate builds in this unboxing…. https://youtu.be/xiwT1sEO_3Y That’s our plan! I hope I have hyped you up for this mod!
  6. It wouldn't be very comfortable... if you had to sit at it.... but works great as a standing desk ;)
  7. PCPartPicker Link: https://pcpartpicker.com/list/zn9Zw6 Good morning all my lovely people! How about a quick update to share our review of the Nanoxia CoolForce case that we modded for this project! Solid intro case with a beautiful smoked tempered glass side panel. YouTube Link: https://www.youtube.com/watch?v=YV3JsLuxLdE As always! Be yourself, be unique!
  8. Thanks Mos! I have a pic to show you once I get them unpacked, but got a small set of nice hand planes. I saw them and thought of you. Lady gave them to me for free with a load of other hardware, fasteners, tools that I got for $30. I'm going back to clear out more hardware/lumber/sheet metal as she's prepping to sell her house after her husband passed a year ago. Even getting my hands on an older table saw for $10 😁
  9. PCPartPicker Link: https://pcpartpicker.com/list/zn9Zw6 Good morning all my lovely people! I’m pleased to announce that #MomsMod is COMPLETE!! So let’s begin….. We start off first with the Gamdias peripherals, the Ares Keyboard and the Hades Mouse. Mask and paint time. Switching over to the Nanoxia CoolForce 140mm fans, we mask the frame off so we can get the fans painted purple! After a day of letting the paint dry, we are ready to start assembling the case. So far so good! That vinyl looks awesome! But now we need the hardware…. Let’s look at the tragic tower she has been using…… all that dust! YUCK! Rip the hardware out, salvage what’s acceptable, then get that Intel motherboard installed in the Nanoxia CoolForce1 case. Now it’s time to drop in an upgraded air cooler that might just do a bit better than her other one… That cable management……. Just don’t look at the backside I told you not to look! But…. we can fix it with these lovely Nanoxia CoolForce combs!!! Boom! Build is complete! One Lavender Everquest case mod complete!! Now what…….?!?! Oh right, need to address that old desk mess situation…. And ta-da! Now she not only has a setup worth showing off, but she’s got some extra organization for all her craft business And here’s an obligatory photo of me training the next generation of modders! My 3 year old diligently putting screws into the motherboard tray while watching YouTube on her tablet. As always, thanks for joining us on this journey and keep modding!!
  10. Haha just the one sandwhich bag of seeds, and I stand at my desk watching some anime that I can binge watch without paying close attention lol
  11. PCPartPicker Link: https://pcpartpicker.com/list/zn9Zw6 Gooooood morning everyone! Did you miss me? Sorry about the long pause between updates, but I wanted to bring you some of the custom sleeving we are doing for the build. We’ve been on hiatus waiting for the weather to turn pleasant again so I can begin painting components. But we began sleeving……. And like all tedious tasks, sunflower seeds are a must to increase concentration! Starting with the 24 Pin we got our purple camo cables in place. Final shots of our 24 pin, absolutely loving the boldness of these Nanoxia cable combs! After the 24 pin was done, we switched gears and made our 8 pin EPS connector as well. Again I apologize about such a long delay in updates, hopefully as this winter is turning to spring I will have more to update soon!! As always…. Keep modding!
  12. PCPartPicker Link: https://pcpartpicker.com/list/zn9Zw6 Hey everyone! Time for a long overdue update! Let’s make this a big one! First I’d like to welcome aboard our newest sponsor GAMDIAS! Who provided a mouse and mouse mat. Also, our streaming partner @SomeRandomChicx from Twitch who provided the matching GAMDIAS keyboard! To continue with materials for this build, we ordered some sleeving to make our custom extensions from MainFrame Customs! Now to get onto what you came for….. the case modding. We unboxed the case and got straight to work. First, we flipped the optical cages. Then took the case apart and reassembled it in a reverse ATX configuration. Next to strengthen the motherboard tray to finalize the mod. The hardest part was making the front mesh back up in a way that still looked normal-ish Our temporary pile of parts while we took the case apart. Our custom vinyl stickers! They will pop nicely against the black case! Until the next update, Happy Modding! Mod Components: Case: Nanoxia CoolForce1 Fans: Nanoxia CoolForce 120/140mm Keyboard: GAMDIAS Ares P1 Mouse: GAMDIAS Hades Gaming Mat: GAMDIAS NYX
  13. We will be kicking off our #STREAM packed weekend with a LIVE Unboxing of our newest mod PC case by #Nanoxia!! Join us Sat(6/23) 6am PST(US) on #Twitch! #MomsMod #Everquest #PC http://www.twitch.tv/DDCustomMods <- Follow and click "Notify" so you don't miss it! We will post the link to the recorded unboxing next week!
  14. Thanks Mos! And the feeling is great. Can't wait to start my next project.
  15. https://pcpartpicker.com/list/jBy4r7 Good morning DDCM fans and followers! How about another DDCM desk PC update? So we needed a shot of the desk to put on our new business cards, so….. I figured I wanted to share with you. We are also in talks to do a hardware upgrade if the vendor approves it. Of course, none of this would’ve been possible without the amazing sponsors! The business cards came out pretty snazzy too! Until next time, Happy Modding!
  16. PCPartPicker Link: https://pcpartpicker.com/list/zn9Zw6 Hey everyone! Just wanted to get the mod log started for our newest case mod! It won’t be anything super crazy just a simple themed “Pay it Forward” mod for my mother. BACKGROUND My mother was always encouraging and supportive in my gaming growing up and to this day still plays Everquest(15 years later…). Because of this, I am transplanting her computer guts into a Nanoxia CoolForce 1 Tempered Glass edition case. Thankfully Nanoxia is sponsoring the case, fans and LED strips to make this a reality. So as we continue down this journey, help me celebrate a belated birthday/retirement/Mother’s Day gift. CONCEPT The front panel of the case will have the EQ logo in lavender and a vinyl decal shot of her halfling druid. The glass side of the case will be frosted with the druid logo. Her main character’s name on the custom PSU shroud. If we can manage to get the wood and hardware, upgrading her gaming workstation is a priority as her small desk does not have the storage to handle her crafts and computer. So I did up a concept for a desk that would provide her with all the organization she would need. WARNING!!! SPOILER!! Here’s the final before and after of the build and her gaming station. Feel free to read through the forums to see how we accomplished this! CASE MOD Before: After: GAMING STATION Before: After: Until the next update, Happy Modding!
  17. Actually the magnets give me an idea.... if I mount small l brackets(painted black) at a depth of the acrylic, then I can place the acrylic in place with the magnets? maybe. but then it'll be flush mounted also(or as flush as I can get) EDIT: Well... L brackets might be too big to work with, but small square wooden dowels should do the trick. Haha, she's ordering a kid's play rug to cover most of the room.... and our 12 year old vacuums lol
  18. Thanks Mos! Still working toward the final photos. Any ideas for mounting the 1/4" acrylic windows? I was going to paint some screw heads read and just mount it to the outside of the desk. But after getting the desk together to it's current state I love how clean the outside is and don't want to sully that with the raised acrylic panels. Additionally, I'd like them to be semi removable for maintenance down the road. Clues? Haha hey monkey man! Thanks for the kind words *wiggles all 10 fingers* yep all there. Also you must remember....all is fair in love and modding I was lucky that my wife didn't have my head for the paint haha. She just shrugged and said "It's just carpet" ....disaster averted there. For the top of the desk, the plan is to paint a fan drawn dragon head and flames, then poly the top. That should keep all that primate oil off the desk.... and beard oil too
  19. https://pcpartpicker.com/list/jBy4r7 Good morning DDCM fans and followers! How about another DDCM desk PC update? First we will start with the winner of my contest. I wanted people on social media to design a dragon and flames to paint on the top of the desk before I seal it up. Here’s the winner. I loved the shape of the dragon head. The flames will need a little cleaning. Ok, back to the desk. We took this picture while it was night time and during the leak test. The next morning we went to paint the top of the desk…. And ended up spending a few hours cleaning the carpet instead DOH! Several hours later I recruited my daughters help and we drained the desk of all the distilled water and filled it with the Mayhems Red Aurora liquid. After the paint dried on the desk top, I attached it in place and took this teaser picture for social media. After all the cable management was done and I verified it was working great, I took this semi finished picture. All that’s left is to install the windows and to get the vinyl lettering in place. And YES, I know it’s a small old monitor for this massive project. haha. I hope everyone has enjoyed this so far and I will update with final pictures on a real camera once I get to the last couple things done. And hopefully by then I’ll have a better monitor too. Until next time, Happy Modding!
  20. https://pcpartpicker.com/list/jBy4r7 Good morning DDCM fans and followers! How about another DDCM desk PC update? We can start off with a glamour shot of the leak testing we did. One of the first things we did while waiting for all the paint to dry was to finish making our custom sleeved extensions. Once the paint dried we immediately set to installing our components and figuring out our cable paths. Then we prepped and installed our painted NexXxos 360 radiators which followed with fans, tubes and everything else. Once it was all connected we started our leak testing. Until next time, Happy Modding!
  21. https://pcpartpicker.com/list/jBy4r7 Good morning DDCM fans and followers! How about another DDCM desk PC update? We left off last time with a completed watercooling loop…. but still had to paint. So we start off by stripping it down to the bare wood. While I waited for some wood filler to dry, I went ahead and painted our Alphacool NexXxos radiators, PSU mount bracket, GSkill RAM heatspreaders, and the fan grills for our rear intake fans. Once the filler was dry, I wasted no time sanding it down. Then just testing a theory I checked the fit of the InWin RGB LED strips and how I was going to run the cable. After the cable test, I brought the desk inside to be wiped down with a damp cloth. Once it was clean and dry we started painting it black by cutting in the corners and angles first. Then we broke out the 3” brush and filled in all the big areas. If you’re still reading this far, the next update will be the components installed and the loop set back up and hopefully filled! Leak testing here I come! Until next time, Happy Modding!
  22. https://pcpartpicker.com/list/jBy4r7 Good morning DDCM fans and followers! How about another DDCM desk PC update? So before the watercooling, acrylic bending, madness ensues….. Here’s a quick picture of our SSD mount. Now that’s over with…. Here’s our Alphacool acrylic tubing runs! I did also record a video on how I cut and bent the acrylic….. But don’t have a computer that has the power to edit/render the video. So bear with me Until next time, Happy Modding!
  23. https://pcpartpicker.com/list/jBy4r7 Good morning DDCM fans and followers! How about another DDCM desk PC update? Let’s get this update started with one of my favorite photos so far. The Alphacool Flow Meter Square Plexi edition. That polished plexi just makes my heart flutter. Should be interesting to see it in action with the red fluid lol. Next was a super daunting task of painting our ASUS Sabertooth 990FX motherboard to get rid off all the green and tan and make it red. Steps: take it out of Night Shark, tape up everything and slip non sticky tape in all the slots and cover any exposed pins, then paint the feces out of it from every angle but straight above, remove tape and pray it turns on….. Once it was painted and all sexy red and black, we installed our customized Alphacool XPX cpu waterblock. We painted the brackets red, swapped out the alphacool logo with the red replacement cover. Looks like it was created specifically for my motherboard…… oh… I guess it was haha After the motherboard was sorted out, we turned our attention to our AMD Radeon R9 290. After stripping it bare of the turbo jet cooler, we installed our Alphacool block and backplate. To mount it to the backplate, we drilled and tapped 6/32 into the backplate and put motherboard standoffs on. Then screwed the motherboard screws in from the back, securely holding our mounting plate in place. If you enjoyed this update, just wait for the next one! It will include pictures of our first time bending acrylic tubing!!! It was a learning experience for sure. Until next time, Happy Modding!
  24. https://pcpartpicker.com/list/jBy4r7 Good morning DDCM fans and followers! How about another DDCM desk PC update? Let’s start this update with some great shots of our Alphacool gear. Sexy watercooling in place so I can start bending tubing soon. We then went onto install our Seagate Barracuda drive in the HDD rack below the radiator shelf. I can only hope the SATA cable will reach haha Speaking of cables, I first made a cable passthrough plate for the power cables to pass through. Sexy 3 grommets from ModMyMods.com. I continued on the trek of cables to work on learning crimping and made my first CPU power cable. Until next time, Happy Modding!
×
×
  • Create New...