Search the Community
Showing results for tags 'tj07'.
Found 2 results
This Mod is now done! Never done! __________________________________________________ Ok the system needs upgrades to keep up with my demands so revamp time! ___________________________________________________ Hello fellow modders! My name is Peter I`m 17. I´m from Denmark i study technology and design. After a while of having a stock 500R so i watercooled it, made small mods for cablemanagement. That was Tundra, now Frozen Tundra is based on a black TJ07, the major mod is the 360 rad in the front drivebayes. I have no "plan" just a idea. New Start on page 12! As i started in November last year her is a recap: I cut the midplate in the drivebayes to make room for the rad. Test fitting the rad, it was perfect not a lot of room made cable routing holes in the midplate and mobo tray. i made the radmounts and fitted them with Nutman inspired dome nuts. made a plexi coverplate with holes for the dome nuts, then i sanded it with 60 grit in one direction, to make it matt. I used the top mesh from my 500R to make a cover for the bayes i am real happy with the way it turned out. I installed my hardware on the mobotray. Then i made the loop. And filled it with Mayhems pastel ice white. next i made a bar to hold 2 120mm fans in the top. i really like the look of that. after a while my tubing became gray/greenish, so i drained the loop and filled it with demin water, there was enough ice white left that the liquid is now white. this is how it looked until a few weeks ago, when my sister asked if i wanted her to paint something, she painted the bay blanking plate white on the sanded side, with the same direction brush strokes. this is where im currently at. my dad i trying to get some alu so i can make blanking plates for the basement and a mid plate. All feedback is welcome! //PWE
this is my mod of a Silverstone TJ07 case the computer is called sabertooth. The motherboard is a Asus sabertooth x58 witch is getting a bit long in the tooth excuse the pun. xspc water block on the processor and some custom ones adapted by me. the graphics cards are r9 290x with ek water blocks on and back plates. there is a 480 rad cooling the graphics cards and a 280 cooling the mb and processor with 8 fans on the rads in a push pull config Apart from the overkill rings on the front and the fans most of the other parts are second-hand or reused off my old system. The case is painted with candy apple red with metal flake the inside is metallic black with holographic metal flake. the first thing i did was to invert motherboard holding plate then i put the hd rack from my old computer in i put aluminium plate in the front and cut the holes for the fans and overkill rings trying find where i was going to put the water pumps the motherboard water blocks i have used old ones of ebay and made copper bottom to suit motherboard then came the painting because of the case is aluminium it needed etch primer then filler primer two coats of metallic silver then four coats candy apple red two coats of metal flake four of lacquer this is the finished computer thanks for the help from the people at Mnpctech post this