Search the Community
Showing results for tags 'Mayhems Dyes'.
Found 2 results
Jump to final photos if you're too impatient to read the journey! CPU Magazine Volume 14 - Issue 12 (December 2014) Welcome to Project Clunk! I must begin by issuing an apology for the seemingly jumpy posts, as I didn't intend on making a project log for this at first but was told I should, so I figured, "why not?" I should also mention that this mod was started the second day of January 2013, working on it on my free time during lunches, etc. and then it sat in a box in the shop for a few months until I continued work on it a couple weeks ago in secret, so the log may be confusing at 1st. I will be using spare parts I have left in the EEL shop so I can clean out some of it and give it a good home too. Also, it will be decked out with a lot of MNPCtech gear so keep your eyes peeled for those! This project won't be too extravagant or expensive either, hence the budget kind of feel to things. Which also makes things interesting to me because I like to flex the creative muscle for no money (other than time invested). This is a project for a friend based on a Bitfenix Outlaw chassis.... or what's left of one anyways... The story begins... Toward the end of last year, (somewhere around November I believe?) I was handed what was left of this case by Hank @ PPCs as it came in on a shipment of RMA cases from misc. retailers in the US on behalf of Bitfenix, and my initial reaction was to turn my nose up at it due to the low-tier case and horrid condition it was in with the stock front fascia busted completely off and pieces hanging left and right from it, dented panels, etc. But the more I looked at the case, the more I felt compelled to just destroy it. And that's not meant in a negative manner either, although I didn't really like the case to begin with due to the thin materials and low cost, but what really caught my eye was the inverted-ATX layout versus size. It's no big secret that I'm a fan of the inverted-ATX layout. I love it for watercooling! I had promised my friend Duke (whose favorite color is GREEN) that I would build him something sometime for him to transplant his *namebrand MATX AMD system* (cough cough) into a "better enclosure", and figured this was a perfect opportunity to do so. My initial idea was to build something kind of post-apocalyptic (due to working on BIO-A10 at the time) or something and it quickly moved to putting it loosely in the Mad Max arena, hence the name. It's just a name borrowed from a character from Mad Max, but nothing to do with the character. It just clicked in place and fit the idea perfectly. It's my take on the idea of it being a part of the gangs that the MFP tends to run down in those flicks -- or at least try to. So it's an anti-MFP build! ;) I should also place the disclaimer that this wasn't an idea stolen from Bill at all; I found it hilarious that he mentioned doing a Mad Max build sometime in the future on a past podcast and I decided to stay silent about it at the time so it would be a surprise when I finally unveiled this. I suppose insane minds think alike! So, just think of Clunk as merely an appetizer for whatever Bill has up his sleeve. I'm guessing something MFP related too. :) Can't wait for it! Let's get on with it, shall we? This is the POS chassis. Lovely, isn't it? I actually liked the way the case looked without the stock panel on it anyways, because those cheap plasticy front panels are a dime-a-dozen to me. I'll be fabricating a new front for the case. It's rather small, considering it an ATX chassis. I'm a packrat by nature, if some of you didn't already know, so I tend to keep a lot of weird things I remove off past cases. I also happen to keep a lot of solid materials that I can use, and I happened to have a front panel off a destroyed Lian Li V-2100B. And look, it also happens to be just the right size for a new front panel! The ridged nature to the panel also adds a certain coolness for it to me too, considering it's just a piece of aluminum (aluminium for Kyle)! And the 1st in a substantial jump forward... Here's what I've been up to with the opposite-mobo side panel... I'll be back when I have more to show after I've ripped the guts out of it and given it the B-Jesus! Thanks for wasting some of your time reading this hog-wash! Toodles!
We are release 4 New products over the next few weeks. First up we have two New Blue dyes. One being "Deep Blue" and the second being "Ocean Blue" Below is a Pic of all three blues together to give you a better idea of what they look like. Left New Mayhems Deep Blue Dye Centre Old Mayhems Blue Dye Right New Mayhems Ocean Blue Dye The new Deep Blue dye has a deep blue look to it then the older blue dye and can be seen down to the PPM (parts per million) The new Ocean Blue Dye has a greenish tinge to it (very slight) giving it a oceanic kind of blue look (depending on were you live as in the UK its would just look green haha). Both these new colours will be out in 15ml Bottles and both will fill more than 10 to 15+ systems each. When using with Pastel is reduced to about about 5 to 10 systems depending on amount used.