If you are having any issues logging in please contact: firstname.lastname@example.org
Search the Community
Showing results for tags 'R9 Nano'.
Found 1 result
Here is a quick little project for AMD to highlight their new small but powerful R9 Nano graphics card. They wanted a scratch build, and were pretty flexible on concepts, but the card had to be the main feature. They also wanted an emphasis on small. So after noodling around in Sketchup, I came up with this design: I figured what better way to feature the card than putting it up on a pedestal? For hardware, I picked out the best parts I could find, keeping in mind the goal of an extremely small footprint. The obvious choice was mITX, so I went with an ASRock X99 board with an Intel 5960x processor, a Crucial M.2 500Gb SSD, G Skill Ripjaw DDR4 memory kit, and a tiny Silverstone 450w power supply. To cool the cpu I got a Corsair Hydro H80i AIO 120mm cooler. Once I got the design finalized, I sent the files out for laser cutting. Special thanks go to Primochill for helping me out on this! With the cut pieces back, I could start assembling. First up was lining out all the ribs and gluing the cross pieces in to connect them together. I used a couple 1/4" pieces of acrylic to get my 1/2" spacing between ribs. After all the ribs were glued, I temporarily assembled the lower box together with the psu and set the rib cage on top for placement. And I had to set the Nano card on it's pedestal to see how it looked, with the backplate taped on for good measure. This lower section will be the only exposed part of the ribs. Another angle.. And here are a couple shots with the motherboard in place. I was testing out the fitment of the PCI-e extender cable that will be tucked under the curved support arm. Don't mind the toolbox, I was working on this during LANfest, while my son was gaming away next to me lol. So far so good! I'll have another update in a couple days. Stay tuned!