Jump to content

Search the Community

Showing results for tags 'Rigid tube'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Pin Board
    • Announcements
    • Giveaways
  • The Mod Zoo Official Podcasts & Weekly Staff Hangout
    • Official Podcast Episodes
    • Questions and Discussion!
    • Weekly Staff Hangout
  • Tech News
    • Latest Tech News
    • 2015 CES Consumer Electronics Show Coverage
    • 2016 CES - Consumer Electronics Show Coverage
    • 2017 CES - Consumer Electronics Show Coverage
  • Project Central
    • The Mod Zoo Staff
    • Featured Projects
    • Member Worklogs
    • Maker or Non-PC Worklogs
  • TMZ Review Central
    • Reviews
  • PimpRig / PCApex Alumni Community
    • PimpRig / PCApex General Discussion
    • PimpRig / PCApex Member Project Logs
    • PimpRig / PCApex Member Project Archives
  • The Picnic Area
    • General Discussion
    • Drawing Board
    • The Water Park
    • Member Reviews and Unboxings
    • The Machine Shop
    • Modding Guides
    • Repair Guides
    • Overclocking
    • Recomended Ebay sellers
    • Comments & Suggestions
  • Food Court
    • The Mod Zoo Gift Shop
    • MNPCTech
    • Smart Computer Store
    • Mayhems
  • The Storage Area

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 2 results

  1. NZXT H630 mod, Doppler effect, by DeKa (completed March 11, 2015) Hello everyone,This is my first post in this forum, Bill Owen recommended me to publish my work here and I will do the best I can as my English is a little limited. I know Bill Owen's work since the start my modding disease. His work inspired me to start in "this" we do around here. madnesses, oh yes. The Primochill fittings revolver I use this mod not sold in Spain, I bought in Germany ... his fault. I am Argentine and I live in a town near Barcelona, Spain. For some time I have been working on various advertising and design projects, but for the last couple of years I'm focused mostly on the PC Modding. I am hoping that my latest productions will catch the attention it deserves, hope you like it as much as I liked doing it. I used a chassis that I personally really like the NZXT H630 and modding Doppler effect. A very minimal, rough and dull looking but extremely quiet. It is also robust and has very discreet lines, with a little work and creativity, looks like a great chassis. One goal of this mod was to work and keep it simple, subtle with minimal lines, using colors typical to that of Asus Republic of Gamers but with a touch more white (not wanting to repeat both reds). I also wanted to create a computer where silence predominated, and for this I used a liquid-cooled high-end custom and distribution of ventilation chord. A minimal, powerful, extremely quiet design and the highest quality components!Below I detailed a worklog ... The Worklog... But first, a look at the finished mod :P Materials / Index Chassis NZXT H630 Black Paint Dust filters Hardware Asus Maximus Extreme VI Intel 4770K 4x4Gby TridentX GSkill RAM 2400MHz SLI Nvidia Gforce 770 Asus DirectCU II OC Corsair AX1200 PSU Corsair Wiring sleeve Samsung SSD 840 EVO 256Gby Samsung SSD 830 256Gby Asus Republic of Gamers Front Panel Liquid cooling components: Radiator EK CoolStream XTX (360) 3x12cms 11FPI 2x14cms 30FPI Koolance Radiator CPU Block EK Supremacy - Nikel block X4 Monarch Memories EK EK-FC770 GTX x2 DCII - Nickel EK-FC680 GTX x2 DCII Backplate x2 EK-FC Terminal - Plexi EKWB D5 Pump Storage with nano coating + TOP Aquacomputer Aqualis Corsairs AF 140 fans x3 x3 SP 120 fans methacrylate rigid pipes Fittings Primochill Revolver temperature sensors and other ... Lighting, wiring and sleeve. Lighting and Wiring Lighting blocks General lighting Sleeve The chassis, modifications and details This ultra tower NZXT is very quiet, versatile (although very large) and robust ... it doesn't come with a window but is internally buffered by acoustic panels so it was something less to worry about. The window mount had to keep up sound damping, and the side door was completely replaced by 6mm methacrylate, much thicker than normal (almost the total thickness of the cover) methacrylate but I gave both the structural robustness as soundproofing needed. As the window would represents most of mod tower’s personality I thought it would be a great idea to continue the front / top of the chassis in it with panels of red methacrylate and black aluminum also would bond everything together... Even had been thought over the idea of illuminating only the red methacrylate structural lines but it was impossible to reach the left side, although it would have been really good, I abandoned the idea. I completely removed a huge rack of hard disks compartments, as I had no intention of using it, no mechanical hard disk here (shhhhh) and I could take advantage of the extra space for a low 3x12cms radiator fin density (FPI), family of noiseless coolers. The remaining gap had to be covered up, and I did so using the same material I used in most of this mod, 1mm thick aluminium that had been painted the same black as the rest of the case. Other smaller the holes were plugged with a double sided film the same colour as the chassis, there was no sense to use a any other material and I kept it like that to preserve the possibility to easily remove it in the future if needed. Painting, matte finish:For teh whole mod project, I used Vallejos Premium water-based paints, specially created to apply airbrush paintings, even though it is very easy to apply and cover a lot with one hand, it lacked the expected resistance the I experienced in other paintings of the same type, perhaps it was because it was a fine pigment (for airbrush) layer ends up being too fine and even more so in areas where I sanded, clean surfaces, with a pre-coating and subsequent matt varnished, it was easily scratched. To combat this effect as best I could, I doubled the manufacturer's recommended application, both the color and the matte varnish. It paid off, I ended up with a though, perfect finish. The absolute black colour box was rough - too black, so had to try break the monotony, I decided to paint some parts like the H440 model, but matte metallic red. The red metallic color is not your typical striking red, but rather a more discreet and applied it along the edges and in the front side USB panel, I tried to paint white grids but it started to sway from the line I wanted. I painted black, red and imitation aluminum ledges which I applied in specific areas which you will see further down. Dust filters: The tower comes with lower, upper and front filters, but in reversing the airflow due to loudness issues, the rear fan instead of sucking, it will be exclusively dedicated to injecting airflow as this will be where the most dust would collect the filter had to be outside, to clean it regularly and comfortably without having to open the entire chassis, so I took the screws on the rear fan and with a little help of velcro, attach to the back just where I wanted it, a fine mesh of pvc sandwiched between two pieces thick light adhesive bonded together, fastened by wing nuts layered with recycled parts. The filter without being anything special, it does the job and is practical. Also place fixed filters in large parts of the chassis with passive ventilation. Hardware: The motherboard: The rear connectors on the motherboard are covered on the inside with a thin piece of bent acrylic adhesive lined anodized aluminum painted black imitation, fastened with Velcro to be easily removable if needed.I also subtly applied a metallic red RoG logo heatsink on the chipset to the mod, so it dits in the middle of SLI, then it gets illuminated by the light of the top graphics card.I made a black matte painted piece of 1mm folding aluminum, I placed hovering with screws on the lower connectors on the motherboard (hd-reset-hd led-USB front-AAFP, etc) used to lighlight the ledge where the PSU is placed, besides giving a brilliant aesthetic look it also hides many cables. RAM: The memories modules had to put in RL and this required removing the stock sinkhead and replace the monarch of EK, seemed like an easy task but it got nicely stuck in memory chips, so very carefully, and with a lot of patience I took art and skill not to damaging any components leaving them ready for the waterblock.
  2. Hey hey guys and girls. We have another awesome themed mod coming your way. This one is based off of one of my favorite comic strips growing up as a kid. Spy vs Spy The Following was obtained from the History section of the Spy vs Spy Headquarters. http://www.spyvsspyhq.com/history.html Simple yet meaningful is one way to describe the wordless black and white comic strip that makes up Spy vs. Spy. The cartoon created in 1960 by Antonio Prohías, depicts the antics of two distinctly different yet similar spies who try to get the best of each other with clever yet strange schemes of espionage and deception. Published in Mad magazine since 1961, Prohías began working on Spy vs. Spy in Cuban, but fled to the United States in 1960 just days before Fidel Castro took over the last Cuban free press. When Prohías came to the United States he knew almost no English, but Mad magazine readers and editors quick accepted him and loved his work. Before he got the job at Mad, he worked in Queens at a clothing factory by day and drew by night in his cramped apartment. His earlier works “Erizo,” “Oveja Negra,” “El Hombre Siniestro,” and “Tovarich” would not work in his new country where the idea of communism was not as prevalent or well taken by pleasure readers. In Cuba if you were not a supporter of Castro you were considered a spy, and this is where he got the idea. Prohías considered himself a spy and thus the idea was born. Prohías submitted his rough pencil concept and design sketches to MAD’s editors on normal 8.5 x 11 paper and would latter redraw the entire carton twice the size for reproduction in the magazine. He would go through the comic strip with pain staking detail and make sure all edges and lines were detailed in his dark bold pen and would almost never ink over his pencil drawings. Spy vs. Spy is now a national icon, symbolic of the Cold War representing good and evil and the struggle for equilibrium. Prohías would stealthily sign each of his Spy vs. Spy cartoons under the title panel, in Morse code, which spelled out the words "by prohias." This is one of the most overlooked details in his work. -••• -•-- •--• •-• --- •••• •• •- ••• Antonio Prohías passed away February 24, 1998. His masterpiece concept of the two spies battling it out lives on in the continuing work done by his successor Peter Kuper. This project is sponsored by the good folks at. http://www.thermaltake.com/home.aspx and http://www.evga.com/ Also brought to you by http://www.v1tech.com/ Specs: Case - Thermaltake Core X9 x 2 Motherboard - EVGA Z97 Classified (Gaming System), MSi Z87 Mpower (Server) CPU - Intel i5 4670K (Gaming), Intel G3258 (Server) Ram - 4 x 4Gb G.Skill Ripjaws (8Gb per system) PSU - 1 x 550w DPS G Modular PSU, 1 x 750w DPS G Modular PSU GPU - 2 x ASUS Strix GTX 970 SSD - 2 x 240 Gb Crucial M500 240Gb HDD - 4 x 500 Gb in Raid 0 CPU Block - Pacific W1 x 2 GPU Block - Pacific Strix Water block x 2 Radiator - Pacific RL 480 x 4 Pump - Pacific P1 D5 Pump /w Silent Kit x 3 Reservoir - Pacific T33 x 4 Cables - 2 sets of Red Tt Sleeved Cables LEDs - BSMods 5050 RGB LED 16.5ft Strip /w wireless remote. The whole idea is to put two complete systems in here all cooled with one large liquid cooling system. The first shipment of parts has arrived. 2 x Core X9 Cases, 2 x Commander FX 10 port fan hub, 1 x 550w DPS G Modular PSU and 1 x 750w DPS G Modular PSU. To give you an idea of the size of the double stacked X9. On the left of this pic is the chassis from a Thermaltake A-71 Full Tower. Each Core X9 is 1 inch taller and twice as wide. ]http://i52.photobucket.com/albums/g15/itsamenicky/IMG_3947_zpsmhdmbtrz.jpg] Here we have One intact X9 and one completely disassembled. The Core X9 has this built in plate that can be removed from the bottom panel so you can install a massive radiator in push/pull. However this is not going to work for what I have planned. For what I want to do the entire floor has to be cut out. Remember kids always use proper safety gear when working with power tools and hazardous chemicals. It doesn't matter how careful you are. Things Happen. * The bottom of the top X9 has been cut out.* * Now after stacking up two empty X9 cases and lifting them both a couple times I quickly realized that once all the hardware and coolant has been added this thing is going to be extremely heavy. Therefore I am going to add casters. Each caster is rated at 150lbs. * Yesss much better. * The rest of the gear from Thermaltake has arrived. * * EVGA sent two gorgeous Z97 FTW boards for our project. * Time to get these bad boys fired up on the test benches. * * Alright Time to get started on the prep work for our paint. * * This is what your case should look like after your preliminary sanding...Do not take it down to the bare metal.....Just take the shine off of it. it should look dusty like its been sitting there for a while. * * Two of the rads are getting prepped for paint. They are going to be painted white. * * Time to get started on cutting the Motherboard mounting plates ready for the Floating Motherboards. * * Remember kids always wear the proper safety gear when working with power tools or hazardous chemicals. We don;t wear safety gear because we are not careful. We wear it for the things we can't control.*(Poopadilly Happens!) * * After the plates have been cut this is all that's left of them. Just enough to hold it in place. Alright time to start shooting some paint. * * I was worried that the additional white would not work well with the light ring...Glad to see I was wrong. It really makes the light pop. * While I waited for the paint to dry I got started on the sleeving. * I have two PSU's to sleeve. This 750w DPS G and another 550w DPS G. * Going to be using some Telios Sleeving from Mainframe Customs(http://mainframecustom.com/) Provided to me by the guys over at Sanctum Sleeving(http://sanctumsleeving.com/) * The double wire didn't quite come out as well as I hoped. Still not too bad. One 24-pin down a hundred more wires to go. I am really liking the new Thermaltake GPU water blocks. Love the Modern Minimalist approach. All but 4 fans have been sleeved. * Getting started with the EVGA Z97 FTW Motherboard. The heat sinks are going to be removed and painted White. *
×
×
  • Create New...