Search the Community
Showing results for tags 'gaming pc feet'.
Found 1 result
PC case feet will help improve airflow and ventilation beneath your PC. This guide is by request! Mnpctech Custom PC Case Feet installation with a Mid Tower with power supply sitting on small adhesive pads on floor of chassis. In this guide, I'm installing the computer case feet in the RIOTORO CR480 Mid Tower. I've seen this type of PSU mounting in the ANTEC 300 and Cooler Master HAF 912 Mid tower cases. You can cut two of the included 8/32 machine screws to 1-1/16" (27mm) and insert screw into the two rear factory foot mounting holes. Some case designs won't the 1" diameter washers included with "Diamond Knurl" PC case feet, so you may need washer with 8/32 hole and 1/4" outer diameter as shown in these photos for the RIOTORO CR480 Mid Tower. 4x Billet CNC Machined Aluminum "Diamond Knurl" Case Feet b y Mnpctech. Thick hard rubber foot insert helps prevent vibration and protect your desk or work station. Base Diameter = 1- 3/4", Height = 1" Set Includes: 4, billet machined aluminum covers, 4, thick rubber feet, 4, 8/32 machine screw nuts & bolts. Tools & Supplies *Ruler for measuring two screws to be shortened to 1-1/16" (27mm) *Hacksaw with bi-metal cutting blade to shorten *Hand file for cleaning end of shortened screws *Phillips screw driver for tightening case feet screws. *(Optional) 2x 8/32 washers with 1/4" diameter as shown in these photos Shortened 8/32 screws shown with 8/32 hole, 1/4" outter diameter washers Insert the included 8/32 nut into two of feet that will mount under the PSU. Tighten the nuts by turning the case feet. washer with 8/32 hole and 1/4" outer diameter