Search the Community
Showing results for tags 'vega 56'.
Found 1 result
Been a while since I've posted a project log, so for those who don't know me, or don't remember, Hi, I'm Mosquito, also known as Chris, and I'm a case modding enthusiast A coworker and I were talking about some of the case mods I've done in the past, and as a result wanted to try watercooling his BitFenix Portal case. He thought switching back to the Wraith cooler for the CPU, and doing a custom loop with a 120mm radiator for just the GPU would be all he'd get. I told him I bet I could fit a 240mm radiator in there, so that's what we've decided to go after... It actually took a lot less modding than I thought it might, as we got relatively lucky with the radiator just clearing the GPU block, but we'll get into that more later. First things first, this is the Bit Befnix Portal, for those who are not familiar Something that makes things a little weird, is that the chassis slides out of the main shell, so we had to make sure we allowed that to continue working through all this. This is what the 'stock' build consisted of. ASRock B350 ITX, Ryzen 1600X, and an RX Vega 56. First things first, gotta tear that down. With the case empty this is, roughly speaking, what we intend to make happen. Removing the back fascia gives a pretty compact little chassis. Though with some indexing pins on the bottom, it doesn't sit on the workbench very well! Next up, remove the drive cage. I'm not sure why this wasn't easily removable, as the bottom is mostly held in place by some sliding connections, but never the less there were 6 rivets to drill out After some fiddling around, we realized that it was going to be a lot more work to get the radiator mounted on the outside of the case, so we would have to make fans in front work instead. Next up, we'll have to get it to fit both fans up front, so stay tuned for that, and please ask questions, post comments, and let me know what you think. Forums are about community, whether we all agree or not