NZXT Hale 90v2 pinouts

[TheBishop 2]

So i ran into this issue while individual slaving the 24pin cables on my customers 1200w NZXT Hale 90v2 PSU.

 

So i jumped into the project a little prematurely. I didn't make a cable map of what goes to what as NZXT does not use the standard 1 to 1 PSU wiring. luckily they were nice enough to give me a pin-out guide so i'm passing it along in hopes it saves someone else the headache :)

 

below is a copy past from the email NZXT support sent me

enjoy

---

pinouts from motherside connector

1. orange
2. orange
3. black
4. 2x red
5. black
6. red
7. black
8. grey
9. purple
10. yellow
11. 2x yellow
12. orange
13. orange/brown
14. blue
15. black
16. green
17. black
18. black
19. black
20.
21. red
22. red
23. red
24. black


Pinouts from the psu side

1. grey
2. yello
3. blue
4. purple
5. black
6. black
7. black
8. red
9. red
10. red
11. orange
12. orange
13. green
14. yellow
15. black
16. black
17. black
18. black
19. black
20. red
21. red
22.
23. orange
24. orange


3 smaller pins

1 red
2 brown
3 yellow

[mrsteve0924 0]

so what why would nzxt not use the standard pin outs?  seems silly

[Mosquito 751]

I made a map for my Hale82 v2 somewhere... I think it's a pen and paper style. I know I made a spreadsheet version of the Silverstone Strider, but that's easy lol

Nice of NZXT to provide it, and thanks for sharing!

[TheBishop 2]

Not sure but that's what I'm to understand. Either way. Hope this helps someone :)

And any time I've asked a question to NZXT I get a great help. Love them.

[skorpien 1]

I just wanted to say thank you for providing this. Saved my butt just now.

I also didn't think to diagram the PSU pinout on my V2 850W and my poor PSU tester paid the price... Thankfully NZXT uses the same pinout for both.

Had the same issue with Corsair not using 1 to 1 pinout and was hoping NZXT would be different. Really can't figure out why manufacturers wouldn't use 1 to 1, other than to confound modders or out of sheer laziness... Or both...