Jump to content
Rkmapz

THE RED HEAD....SET STAND

Recommended Posts

For the 1st time built a Headset Stand for my own use...as I was thinking along time ago that I need a head set stand as my big Tactic 3d Sigma doesn't have a suitable spot in my room to lay around...The built was made to look little scrappy and waste so don't mind imperfect measurements and curves as it meant to be in that way....DSC_0747_zps878f4ae0.jpg

 

The 1st idea which came in my mind that the base and the top would be a wood cutout...some scrap wood was available in the house so made a measurement to cut it out for base and top...

DSC_0748_zps44d3f0f3.jpg

here's another shot of the pencil sketch which was done

 

DSC_0749_zps81d705ba.jpg

 

Wanted to made both of this piece as the base and top but dew to the bad seasoning of the wood one part was broken while I gave little pressure in that..

 

DSC_0819_zps28771273.jpg

Time to cut out the main stand which I decided to make with 6mm thick acrylic

 

DSC_0820_zps465e0c4a.jpg

 

DSC_0821_zps519a1237.jpg

I guess this would be enough for assassination....

 

DSC_0822_zps22279565.jpg

 

Here it is the complete cut of the stand...now its time to bend it...

DSC_0823_zps694d7684.jpg

 

here goes nothing...one side bended....but it was difficult to bend the other side as I didn't had a proper bending tool

 

DSC_0824_zps5eaf0560.jpg

 

This sides bending was nice....but the other side was... :(....but I managed to look same as much as I could

 

DSC_0825_zpsaac984d6.jpg

 

Here is the stand with all its glory....

 

DSC_0826_zpsd96f2fd7.jpg

 

made a little bend it the top so that the headset doesn't drops or slides off...

 

DSC_0827_zps49bc6d31.jpg

 

here is a nice clear shot I guess....

 

DSC_0828_zps652a0eb9.jpg

 

This is how much straight I could make as it was bend by hand... :(....

 

DSC_0832_zpsc1900b73.jpg

Metal cutting time.....I have cut these from some spare casing metal that I had...turns out to be useful I guess....

 

DSC_0833_zpsabedb881.jpg

This little pieces will be added in the sides and front also in back to make it sturdy and supportive...

 

DSC_0834_zps32cb2337.jpg

 

DSC_0835_zpsb0e2ee55.jpg

6 pieces are needed.......now its time to bend these...

DSC_0837_zps41123a10.jpg

 

bending done in a scrappy way as it has to look like Poopadilly he he... :P

 

DSC_0838_zpsd1f327b5.jpg

 

here the front steel bend part is attached with a thin layer of red acrylic to be the side of the base..

 

DSC_0839_zpsc2023761.jpgDSC_0840_zpsc9fe6c51.jpg

some more shoots....

DSC_0841_zpsf712676d.jpg

 

After attaching the side steel plates....

 

DSC_0842_zps3a705732.jpg

 

DSC_0843_zpsc0665f98.jpg

 

Spray painted the wood so it doesn't stay with the woodiness.... :P....Its wasn't good as the wood piece wasn't that much good quality...but as I'll not keep this color no there are no problem at all...its just to be caution to that no wood like color doesn't come out...

 

DSC_0844_zps49e1b4fa.jpgDSC_0845_zps8fd8e85d.jpgDSC_0846_zps855a1feb.jpg

Here is the Stands transformation....its looking good already....didn't painted the thin bottom for a reason... ;)..you will see....

DSC_0847_zps7df8f872.jpg

 

Here goes my front steel plate after cutting and sanding the corners....this is my modname RKMODZ....Hope u guys like the logo...please do let me know....

 

DSC_0848_zps59164a5d.jpgDSC_0850_zps2e02ecef.jpgTotal scrappy effect done.... :P

 

 

 

DSC_0851_zps5b60eeb9.jpg

 

DSC_0852_zpsb4fd9dfb.jpg

Here is the top base of the stand...CF wrapped to let it look stylish little bit....

DSC_0853_zps25a3738a.jpg

some wiring are needed for something...

DSC_0854_zps143d0acc.jpg

 

DSC_0855_zpsc4ac3534.jpg

 

DSC_0856_zps6a489c0d.jpg

 

And Ba-am here goes the thin side red acrylic....my heart was broken then.... :(...

 

DSC_0857_zps241b491f.jpg

 

DSC_0858_zpsd3a2af22.jpg

 

Started thinking that what to do...and came up with this as it was a scrappy built...so it helped..but after sometimes another part was broken accidentally...so cut a new one..

 

DSC_0805_zpse6d62863.jpg

 

And luckily I was able to assemle the whole thing but lastly the crack came again...this time I wasn't pissed off...just figured out the thing that what I should do...cause the last staple pin wasn't a successful one....

 

DSC_0806_zpsf32d3db9.jpg

 

The bottom of the stand...

 

DSC_0807_zps938c2f49.jpg

 

And this time the attempt was success....attached it with another piece of acrylic...looked scrappy of course....and also went well with the built... ;)..So I was Happy...

 

DSC_0808_zps5a6522c2.jpgDSC_0809_zps6717b68a.jpg

 

The Back side of the stand....and there are the switch and the connector for the magic...LOL...

 

DSC_0810_zps7f3e8e11.jpg

 

I guess the logo is looking awesome....what you guys think...please do comment in anything freely.. :)

 

DSC_0811_zps19b294ee.jpgDSC_0812_zpsa4ef2f99.jpg

 

Added some rubber feet with adhesive...so that the bottom screws doesn't make a mess in the surface where I will put it

DSC_0813_zps2bbfdf71.jpg

 

DSC_0814_zps69a761e1.jpg

 

HERE IS THE FINISHED PIECE......

 

DSC_0815_zps3bcdf1fe.jpg

 

DSC_0816_zps9c697322.jpg

 

DSC_0817_zpsb3c65d23.jpg

 

DSC_0818_zpsa7a44f80.jpg

 

DSC_08192_zps326006ff.jpg

 

DSC_08202_zps724eb570.jpg

 

DSC_08212_zps597b68e6.jpg

 

 

DSC_08222_zpse3ce348c.jpg

 

DSC_08232_zps78aea032.jpg

 

DSC_08242_zpsea5cbd0f.jpg

 

Lights Out.... 

 

DSC_08252_zpsab844dcb.jpg

 

 

Close shoots....

 

DSC_08262_zpsb819e9cb.jpg

 

From the top...

 

DSC_08272_zpsf99e51c9.jpg

 

DSC_08282_zps4a35a2aa.jpg

Side...

Please do comment and say anything and everything you like and don't like about it....every comment is a lot appreciated....

Share this post


Link to post
Share on other sites

Nice - The sign of a well loved set of cans - the vinyl is peeling and exposing the soft fluff below!  

 

Sweet idea, man! As I get my work area/desk cleaned up and reorganized, I may have to look into building my own to keep mine off the floor.

 

To the Fan Page with you!

 

https://www.facebook.com/TheModZoo/posts/10152296655047009

Share this post


Link to post
Share on other sites

Nice - The sign of a well loved set of cans - the vinyl is peeling and exposing the soft fluff below!  

 

Sweet idea, man! As I get my work area/desk cleaned up and reorganized, I may have to look into building my own to keep mine off the floor.

 

To the Fan Page with you!

 

https://www.facebook.com/TheModZoo/posts/10152296655047009

Woah its a great honor...for featuring me.....Can't Express how much happy I am now...You made my day....Glad that you like it...:)...@drougnor

Share this post


Link to post
Share on other sites

Dude, to me, this is the heart of Modding - You had an unmet need, found the materials and made it happen. 

Glad that you have liked it and featured it and made me so worthy in the modding world bro.....:)

Share this post


Link to post
Share on other sites

Look at you man, that is really really awesome. And just like Jeremy aka drougnor said, what you did is what modding is all about. 

 

Great work.

Wow....that's a lot for me that u liked it so much Captain.....feeling great to see all the comments and likeness of my work....:)

Share this post


Link to post
Share on other sites

hey! this is pretty fancy! really cool light

Thanks a ton bro......Glad that u noticed the coolness of the light....;)

Share this post


Link to post
Share on other sites

caught this on the mod zoo fanpage, Very clever idea and design Rkmapz!

And now I am officially....melting out Bill...getting a comment like that from my modding inspirational person means a lot for me....:).....U made my day bro......

Share this post


Link to post
Share on other sites

Thanks a lot to all the friends for viewing my post....I am so much honored for all of your response...and also grateful to the admin for featuring this in the fan page....Its a dream come true for me....:)

Share this post


Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


    Chatbox
    The ModZoo keeps getting blackout drunk and losing months of time. Apologies. -Also, anyone know where to get rid of a dead hooker?
    You don't have permission to chat.
×
×
  • Create New...