Jump to content
MetallicAcid

Origami - An S-Frame project by MetallicAcid

Recommended Posts

Untitled-1_zpszakzrrqf.png
An In Win S-Frame project

 

By MetallicAcid

 

 

 

 

 

Project made possible by following sponsors:

ASUS    ||    Nordic Hardware

Intel    ||    Inet

Kingston    ||    Ocaholic

In Win    ||    SilverStone

Carplus.se    ||    Dremel

Modding Stylz    ||    Gosumodz

V1Tech


 

 

 

 

 

Backplate installation, and GPU installed... Just waiting on water cooling (still...)

 

 

 

Hello once again for reading my project log. This is a short and sweet update :) I installed the backplates onto the GTX980 Ti Strix GPUs, then went ahead and installed them into the S-Frame chassis. 


 

I have plans to add some custom brushed aluminium panels into the sections of the backplates so that it matches perfectly with the project design. Please let me know what you think, but keep in mind that I will have acrylic water blocks installed with black cooland running through the system... ;)

 

DSC01127_zpswwgexljb.jpg

 

DSC01128_zpsnus7tlnu.jpg

 

DSC01129_zpssogxb5n3.jpg

 

DSC01130_zpsvrx4fy1k.jpg

 

DSC01131_zpsukdmp3u9.jpg

 

DSC01134_zps1eniazt2.jpg

 

 

Thank you for reading!

Justin "MetallicAcid" Ohlsen

 


Share this post


Link to post
Share on other sites

Untitled-1_zpszakzrrqf.png
An In Win S-Frame project

 

By MetallicAcid

 

 

 

 

 

Project made possible by following sponsors:

ASUS    ||    Nordic Hardware

Intel    ||    Inet

Kingston    ||    Ocaholic

In Win    ||    SilverStone

Carplus.se    ||    Dremel

Modding Stylz    ||    Gosumodz

V1Tech


 

 

 

 

 

Sponsor update, GPU install, cables started, sticker install

 

 

 

Hello my modding family! Some awesome custom cables, custom vinyls and anodized aluminium cable combs have come in, and I am currently working on modifying the cables to perfect lengths ;)


 

DSC01116_zpspkxurins.jpg

 

DSC01117_zpshl0tllyw.jpg

 

DSC01118_zpsh3qc0g4a.jpg

 

DSC01119_zpsjnununes.jpg

 

DSC01120_zpsqeopnr24.jpg

 

DSC01121_zpsqobxhlvf.jpg

 

DSC01147_zpsckya4oat.jpg

 

DSC01148_zpsa2rthpnl.jpg

 

DSC01054_zpsm0zqzu1p.jpg

 

DSC01057_zpsguxlvirw.jpg

 

DSC01060_zpseyqyplgv.jpg

 

DSC01064_zpsonvajvkf.jpg

 

DSC01066_zps7ljddkj7.jpg

 

DSC01068_zps3cvk7d1r.jpg

 

DSC01069_zpsl88uqepk.jpg

 

 

 

 

Thank you for reading!

Justin "MetallicAcid" Ohlsen

 


Share this post


Link to post
Share on other sites

Oh my god... It has been almost a century since I have updated  this project thread. With our 4month old, buying a house, entering competitions and starting a modding community, I have not had much time infront of the PC to post anything for my beloved project Origami.


 

So without any further waiting, I would like to post a massive update for your reading pleasure!

 

Untitled-1_zpszakzrrqf.png
An In Win S-Frame project

 

By MetallicAcid

 

 

 

 

 

Project made possible by following sponsors:

ASUS    ||    Nordic Hardware

Intel    ||    Inet

Kingston    ||    Ocaholic

In Win    ||    SilverStone

Carplus.se    ||    Dremel

Modding Stylz    ||    Gosumodz

V1Tech    ||    Bitspower


 

 

 

 

 

Super massive F-Off update of epic proportions. WARNING: Prep some new underwear...

 

 

 

Let me start off by thank you for your patience. Without you all following my work, inspiring me with your own projects and giving me suggestions on how I can improve, I would not enjoy create what I create! So thank you.

 

With this update, I would like to show you all of the progress right up until just before I took the final photos for this project... Yes - it is finished and being used already, I just not have had the time to sit down like now and formulate this update for you. I will try to talk through the images so you know what I am doing and thinking, and it is not just a massive photo dump which will bog down your bandwidth..

 

 

 

Painting the GPU brackets black - with Plastidip

DSC01259_zpsxlyi8y7y.jpg

 

DSC01260_zpsjdrplnru.jpg

 

DSC01261_zpshuahjw7f.jpg

 

DSC01262_zpscixgrfa2.jpg

 

DSC01263_zpsrbo7a6qq.jpg

 

 

 

 

 

Installing the backplates - Before any modifications to them

DSC01264_zpsjywvxwe8.jpg

 

DSC01266_zpsbmzxmnkh.jpg

 

 

 

 

 

Bitspower parts delivery and sponsorship announcement! Such quality, much fittings wow!

DSC01331_zpssdi4t4wv.jpg

 

DSC01332_zps1pothx20.jpg

 

DSC01333_zpsxrnw2ms3.jpg

 

DSC01334_zpsdzvn6kdc.jpg

 

DSC01335_zpsjdhbkhxs.jpg

 

DSC01336_zpsn2ljkteq.jpg

 

DSC01337_zpsjwmeo0gx.jpg

 

DSC01339_zpsyugrq8gs.jpg

 

DSC01341_zpsmwfeegwc.jpg

 

DSC01343_zps04ixwbk9.jpg

DSC01348_zpsfzjmf9ig.jpg

 

DSC01351_zpsxqewylex.jpg

 

DSC01353_zpsslip9lrc.jpg

 

DSC01355_zpsw4jybzrw.jpg

 

DSC01356_zpshxzzohrd.jpg

 

DSC01359_zpsnkaxlfrn.jpg

 

DSC01360_zpswmcehrwa.jpg

 

DSC01362_zpsjotnnz2x.jpg

 

DSC01330_zpsv7v9mx9m.jpg

 

 

 

 

 

Installing the Bitspower blocks

DSC01368_zpsv8rhxe8l.jpg

 

DSC01369_zpsyhrvwata.jpg

 

DSC01371_zpsvtcfnxov.jpg

 

DSC01372_zpsbldgo0qa.jpg

 

DSC01373_zpsmubmvc3v.jpg

 

DSC01376_zpsvzjyq0cu.jpg

 

DSC01377_zpsczms5udk.jpg

 

DSC01379_zpsc1an6wtt.jpg

 

DSC01380_zpsn3oyqgvc.jpg

 

DSC01381_zpsuukgvqnd.jpg

 

DSC01384_zpsmz1ripjg.jpg

 

DSC01386_zpsyvzfaenp.jpg

 

DSC01388_zpssj2wbpf0.jpg

 

DSC01389_zpsixh8ss0v.jpg

 

 

 

 

 

Backplate modification with custom cut and brushed aluminium panels

DSC01391_zpsgb70qepd.jpg

 

DSC01392_zpspgudkhhs.jpg

 

 

 

 

 

Custom radiator bracket which is to be mounted behind the motherboard tray

DSC01401_zpsbsyxcac0.jpg

 

DSC01923_zpseinqb8e2.jpg

 

 

 

 

Custom panel to hide unused front IO panel holes

DSC01427_zpsadh6o1ar.jpg

 

DSC01428_zps4a0wxb9e.jpg

 

DSC01429_zpsjt6pikfy.jpg

 

 

 

 

 

Removed unwanted cables and sleeving the remainder

DSC01431_zps20jy8ngz.jpg

 

DSC01432_zpsitud4bct.jpg

 

DSC01433_zps2qsq8v2h.jpg

 

 

 

 

Installed pump mod kit and sleeved cables, then took a porn shot of the PC on my desk

DSC01436_zpsgxjpytwe.jpg

 

DSC01440_zpsob48pxky.jpg

 

 

 

 

 

 

Measuring and installing the reseroir

DSC01917_zpstffafa0t.jpg

 

DSC01918_zpsum3kmdyv.jpg

 

DSC01919_zpstim5smvm.jpg

 

DSC01920_zpsa8tveyw5.jpg

 

DSC01921_zpsuo7bnb2i.jpg

 

 

 

 

Removing the red anodizing and brushing the screws

DSC01924_zpstcwt8vnm.jpg

 

DSC01925_zpsin7uidfs.jpg

 

DSC01926_zpssvedjjiv.jpg

 

DSC01927_zps4tc02wj8.jpg

 

DSC01928_zpsonzmq4hn.jpg

 

DSC01929_zps0ksdauwy.jpg

 

DSC01930_zpsl4rk9woa.jpg

 

DSC01931_zpszzv3wbr3.jpg

 

DSC01932_zpsvo0xeyhu.jpg

 

 

 

 

From here after the photos are pretty sparse until I take the final photos.. This is because of a combination of things and time constraints which made me focus only on the modding and building of this project and not the photography with the DSLR. Most of those images ended up being taken on the phone "on the fly" and posted up on FB or Instagram.

 

 

 

So thank you once again for joining me on this journey. The next time I post it will be with the final photos for this project. Please stay tuned as they will be shown within in the week!

 

Kind regards,

Justin "MetallicAcid" Ohlsen

 


Share this post


Link to post
Share on other sites

 

Untitled-1_zpszakzrrqf.png
An In Win S-Frame project
 
By MetallicAcid
 
 
 
 
 
Project made possible by following sponsors:
ASUS    ||    Nordic Hardware
Intel    ||    Inet
Kingston    ||    Ocaholic
In Win    ||    SilverStone
Carplus.se    ||    Dremel
Modding Stylz    ||    Gosumodz
V1Tech    ||    Bitspower
 
 
 
 
 
 
Final photo shoot - Project Origami is finished!!!
 
 
 
Hello once more to my latest and last update to my beloved project Origami - my modding project featuring an In Win S-Frame with custom pearl white paint!
 
This project has been a wild ride, and very enjoyable as well. It has been a challenge of both skill, and my patience and I believe that I have grown as a modder because of the experiences I have had while working on this project.
 
With this update, I am proud to present the Origami - in all of it's completed glory.
 
 
DSC02066_zpss6fkbzey.jpg
 
DSC02067_zpsj9kmxjhd.jpg
 
DSC02068_zps30whdusi.jpg
 
DSC02069_zpszh7ofk4o.jpg
 
DSC02070_zpshyfxgpu7.jpg
 
DSC02072_zpsvevmwilk.jpg
 
DSC02075_zpssjsux3qi.jpg
 
DSC02078_zpsnvnnujh1.jpg
 
DSC02082_zpsy6lchebw.jpg
 
DSC02085_zpsyqa5n1nd.jpg
 
DSC02086_zpsdimuol8s.jpg
 
DSC02092_zpsvkmjlpaj.jpg
 
DSC02093_zpsohh07nu6.jpg
 
DSC02094_zpsjqqwgdwl.jpg
 
DSC02096_zpsmhmcgyha.jpg
 
DSC02098_zps9jwmccwh.jpg
 
DSC02100_zps2xu6cjt2.jpg
 
DSC02102_zpseywbaili.jpg
 
DSC02103_zpskesrt862.jpg
 
DSC02104_zpsx2d0gyfx.jpg
 
DSC02105_zps0ang8y9n.jpg
 
DSC02106_zpsiwzuo8gc.jpg
 
DSC02107_zpsqldvgfub.jpg
 
DSC02109_zpsziwswflo.jpg
 
DSC02110_zpsoq3uwe6m.jpg
 
DSC02112_zpswmnxuxc7.jpg
 
DSC02113_zpsp8zmdhgj.jpg
 
DSC02114_zpsycdxuszl.jpg
 
DSC02118_zpsjunnauki.jpg
 
DSC02120_zps1t7tighj.jpg
 
DSC02121_zpsceszwivh.jpg
 
DSC02124_zpsjr4k48ts.jpg
 
DSC02126_zpsnuszhzs4.jpg
 
DSC02130_zpshdacgkiu.jpg
 
DSC02132_zps5rwldbiw.jpg
 
DSC02134_zpsyfvjvgez.jpg
 
DSC02135_zpsyu9sjrl3.jpg
 
DSC02136_zpsu31y89ng.jpg
 
DSC02140_zpsmjarsmxi.jpg
 
DSC02142_zps6jjymntd.jpg
 
DSC02143_zps4su9xi9y.jpg
 
DSC02145_zpskheolvrd.jpg
 
DSC02146_zpsizct0zpa.jpg
 
DSC02147_zpsutbcm5vp.jpg
 
DSC02149_zpskyeqs5y6.jpg
 
DSC02153_zpsbwkf1srt.jpg
 
DSC02155_zpsfomogmox.jpg
 
DSC02156_zpsigmqb9eq.jpg
 
DSC02162_zpspe3qo2cr.jpg
 
DSC02163_zpsvikihyos.jpg
 
DSC02164_zpsqsvqxix7.jpg
 
DSC02165_zpshsuypxtl.jpg
 
DSC02174_zpsyytif6po.jpg
 
DSC02175_zpsma4djwbh.jpg
 
DSC02177_zpsx2rc06ze.jpg
 
DSC02182_zps7ndzm0lo.jpg
 
 
 
 

 
As a small teaser for you guys, I am already finished with another PC modding project using a Fractal Design Define S with a redefined internal layout and custom water cooling. A build log for this project will be created when it is finished after the end of January.
 
I will also be starting a new project from February featuring some of the latest hardware from both Corsair and ASUS, so stay tuned for that announcement here on the forums.
 
So thank you all once again for following my project. I really hope that you have enjoyed this journey as much as I have creating it. Please leave a comment with what you think of the project, and how I can improve my work for any future projects :)
 
With best regards,
Justin "MetallicAcid" Ohlsen
 

 

Share this post


Link to post
Share on other sites

Clean execution start to finish, and a wonderfully put together project log.  This was a lot of fun to read through.

 

Great work, looking foreword to more of your projects :)

Hey mate!

 

Thank you so much for reading my log, and I am glad to hear that you have enjoyed the finished product :)

 

/J

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...