Jump to content
k.3nny

K.3nny's TopNotch Phantom 820 Casemod getting allong.....

Recommended Posts

New build new changes

Thnks to NZXT HQ for this case: NZXT Phantom 820 Gunmetal.

Gonna strip it down, tear it up and design and build a better one in my style.

Originally

PHANTOM-820-1.jpg

small_nzxt-phantom-820-7.jpg

small_nzxt-phantom-820-8.jpg

Stock, It isnt my style, to futuristic, Gonna flip it all over,go the clean route and Do my thing.

CIMG4704.jpg

CIMG4707.jpg

Flipped motherboard I/O is on the upper now.

CIMG4708.jpg

CIMG4709.jpg

CIMG4711.jpg

I need a clean top panel now, gonna leave only the mesh part stock, the rest will be cleaned

CIMG4712.jpg

CIMG4713.jpg

CIMG4714.jpg

See u with the next update

Share this post


Link to post
Share on other sites

Update

Cutted the top

CIMG4721.jpg

Created a sheat of alu to be the new top plate

CIMG4722.jpg

Mounting holes

CIMG4723.jpg

More holes :P/>

CIMG4724.jpg

Fits like a glove *thats flush :D/>!

CIMG4726.jpg

CIMG4727.jpg

CIMG4728.jpg

Time to mark al the holes and cut-outs

CIMG4730.jpg

See u at the next update :)/>!

Share this post


Link to post
Share on other sites

Parvum commin to an end almost (or not ;)/> ) but progress was needed!

Did some things today

2x Gtx 470 incl all EK assecoires, littlte older then people wanna see in buildlogs, but hey, Low budget = me :)/>

CIMG5173Copy.jpg

CIMG5174Copy.jpg

CIMG5175Copy.jpg

CIMG5177Copy.jpg

I will make Custom tops for the blocks

Did also some work on the case, finished the top (the big works) and pop rivited the whole chassis!

CIMG5178Copy.jpg

CIMG5180Copy.jpg

CIMG5181Copy.jpg

CIMG5182Copy.jpg

CIMG5183Copy.jpg

CIMG5184Copy.jpg

Gonna create my own feet and gonna remake the back panel, also goin to remake the whole inside!

Share this post


Link to post
Share on other sites

Update :D/>

Few days back i had allot of scrap plexi, (thanks to father in law :D/> ) normally would take 1.5mm alu, but hey, some quality plexi is also a good thing :D/>!

CIMG5185Copy.jpg

CIMG5188Copy.jpg

CIMG5187Copy.jpg

CIMG5190Copy.jpg

CIMG5191Copy.jpg

CIMG5193Copy.jpg

CIMG5194Copy.jpg

CIMG5195Copy.jpg

CIMG5198Copy.jpg

CIMG5197Copy.jpg

Need to wait on some rads who are still in production :(/> soon i wil buy 6pumps/tops: http://www.highflow.nl/pompen/andere-fabrikanten/alphacool-dc-lt-ceramic-12v-dc-pump-bulk-version-13154.html + http://www.highflow.nl/pompen/andere-fabrikanten/alphacool-dc-lt-plexi-top-13136.html . (dual loop)

Because i can u know :P/> just some crazy feces generator loops!

2loops

Loop1: RES-3xPUMP-360(backpanel )-GPU-GPU-RES.

Loop2: RES-3xPUMP-360(frontpanel )-CPU-MEM-RES.

Share this post


Link to post
Share on other sites

Update :D!!

Custom front door, Gonna weld the grill into the door :)

CIMG5202.jpg

CIMG5203.jpg

CIMG5204.jpg

CIMG5205.jpg

Also gonna weld this under airfilter handle thing into the front:

CIMG5206.jpg

CIMG5207.jpg

CIMG5208.jpg

The front will be made in one piece, i am going to weld the door also, Clean as a Muttertrucker ;)

Also did mounted all the plexi panels because one of these days my rads will come with the mail :) i needed to be sure it would fit the 8CM!(yes 8!) thick rads :)

CIMG5212.jpg

CIMG5219.jpg

CIMG5222.jpg

CIMG5223.jpg

CIMG5231.jpg

Hardware test fit, so i cant make a mistake with the rads :)

CIMG5224.jpg

CIMG5226.jpg

see u on the next one.

Share this post


Link to post
Share on other sites

Update!

Did allot today, alle the panels are done! (exclusive the rad cut-outs)

NOTE! some pics are edited, Some parts i cant show! (secret stuff :D )

Starting with the hardware AGAIN in the case, so everything get the fit as is should!

CIMG5244.jpg

Mounted and drilled everything for the panel support and connection.

CIMG5245.jpg

Rad support 1 ;)

CIMG5247.jpg

CIMG5246.jpg

Rad support 2 ;)

CIMG5249.jpg

Midspeed triebs <3

CIMG5257.jpg

getting everything lined up and test mounting it!

CIMG5271.jpg

CIMG5274.jpg

CIMG5275.jpg

also i figured out how to connect the first line of 3 pumps, so i could make the support and the connection tabs :)

CIMG5279.jpg

CIMG5280.jpg

CIMG5281.jpg

CIMG5282.jpg

See u soon on the next update :)

Share this post


Link to post
Share on other sites

Update!

Finished the pump connection plates :)

CIMG5284.jpg

CIMG5285.jpg

CIMG5286.jpg

3 little pumps :D!

CIMG5287.jpg

CIMG5290.jpg

scrollsawed the radiator holes, and a notch here and there :)

CIMG5292.jpg

CIMG5293.jpg

CIMG5291.jpg

All sawed panels

CIMG5294.jpg

See u guys at the next update :D

Share this post


Link to post
Share on other sites

Update

Played a little with the pumps, Think this is is the final outcome, i got plenty of room so thats not the point, but i dont want to hide them, i know its cleaner (always when you hide stuff)

CIMG5296.jpg

CIMG5298.jpg

CIMG5299.jpg

First Panel is done :D! realy glad with the results.

CIMG5301.jpg

CIMG5303.jpg

CIMG5304.jpg

CIMG5306.jpg

Gonna be alllrighty :)

Share this post


Link to post
Share on other sites

update :D!

Finally i can tell about this haha :D!

Thnks to Freddy (Highflow.eu) that gave the opertunety to work together with martin (The Feser Company)

picss:

DSC_0073.jpg

DSC_0074.jpg

DSC_0075.jpg

Fittings displayed

DSC_0077.jpg

3/8th hose Uv green

DSC_0079.jpg

HF admiral sidepanels

DSC_0089.jpg

DSC_0090.jpg

DSC_0091.jpg

First pumps connected and test loop thingy

DSC_0092.jpg

DSC_0093.jpg

DSC_0094.jpg

DSC_0096.jpg

first loop

DSC_0101.jpg

DSC_0102.jpg

other 3pumps waiting

DSC_0099.jpg

both loops done.

DSC_0108.jpg

DSC_0110.jpg

DSC_0111.jpg

DSC_0112.jpg

DSC_0113.jpg

*note, loopscan be changed :D

See u on the next one :D!

Share this post


Link to post
Share on other sites

Those rad's have a really interesting design, might pick a few of em up. I'm loving this build :D, can you maybe do a tutorial in the tutorial section on how to turn the mobo around? I might want to do that with my CM Storm Trooper :D

Share this post


Link to post
Share on other sites

Silverstone style inversion with symetrical loops and rads in a Phantom...

Kenny you are one very very sick individual (in a good way) :D B)

What depth/thickness are the Feser rads?

Share this post


Link to post
Share on other sites

topnotch.png

After a week hard work, the inside is almost done, i can focus more on the outside now :)

Picsss

DSC_0125.jpg

DSC_0126.jpg

DSC_0127.jpg

DSC_0128.jpg

DSC_0129.jpg

DSC_0132.jpg

DSC_0134.jpg

DSC_0136.jpg

1 uv led <3 just for fun

DSC_0139.jpg

I like this picture allot haha :D!.

DSC_0140.jpg

Custom door, i welded the 2 pieces toghether.

DSC_0141.jpg

DSC_0142.jpg

DSC_0144.jpg

window.

DSC_0145.jpg

leds on 12 volt, gonna be 7 volt finally

DSC_0147.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...