Hello Munky,

If you have been having any issue registering, or logging in please email kyle@themodzoo.com.

Sorry for any inconvenience caused!

Welcome to The Mod Zoo

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

InsolentGnome

Gigantea-CM Elite 130 casemod[Completed]

126 posts in this topic
Well, I'm going to enter into the CM mod contest again.  This year my subject is the Cooler Master Elite 130.  A nice, tame mITX case that I'm hoping to give a little more bite!  I'd tell you more about what my plans are but that would totally kill the surprise!  I love a bit of suspense in a build log. :hurr:  Don't worry, at some point I'll have to let you all in on the big plot twist, but until then...ooooohhhhh, suspense!  

So lets start with the patient.  Or rather...test subject.

Gigantea-2016-02-01_20.21.34-me.jpg
 
Gigantea-2016-02-01_20.22.09-me.jpg
 
Gigantea-2016-02-01_20.22.34-me.jpg
 
Uh oh, kiddies, close your eyes.  It's getting naked!
 
Gigantea-2016-02-01_20.23.49-me.jpg
 
Gigantea-2016-02-01_20.24.24-me.jpg
 
Gigantea-2016-02-01_20.29.48-me.jpg
 
So you're probably wondering about calling an mITX project Gigantea.  Definitely a odd name for a tiny box.  Stick around to find out.

 

Share this post


Link to post
Share on other sites

Now for the guts of Gigantea.  At the heart of the beast, we have an Intel i5 4690K Devil's Canyon CPU slotted into a Gigabyte Z97N-WIFI motherboard.  Cooling for the CPU will be taken care of by an EK Supremacy EVO block.

Gigantea-2016-02-03_20.23.01-me.jpg

Memory is an 8GB kit of 2133MHz Corsair Vengeance Pro 

Gigantea-2016-02-03_20.24.22-me.jpg

Graphics will be handled by an Asus Strix GTX980 with an EK GTX Strix water block.

Gigantea-2016-02-03_20.21.57-me.jpg

Storage will be 2 Samsung 850 EVO SSD's, one 250GB and one 500GB

Gigantea-2016-02-03_20.19.05-me.jpg

And power will come from a Cooler Master V850 PSU

Gigantea-2016-02-03_20.20.06-me.jpg

Now for the cooler stuff, er, cooling stuff.  Radiators are 120mm Alphacool XT45's.

Gigantea-2016-02-01_20.32.22-me.jpg

The reservoir is one of Monsoon's new MMRS setups.  The 200mm version with the red accents and the frosted reactor tube.  Though I'm not sure whether I'm coloring the coolant yet or not, so I do have a blood red tube on the way as well so I have options.  This res pairs well with Monsoon's red free center fittings and 90's.

Gigantea-2016-02-01_20.39.31-me.jpg

And for the pump, an Alphacool D5 with a Monsoon pump top and cover.  I'm actually swapping this pump mount with a D5 adapter for the res.  They were sold out, but after some checking with people in the know, PPC's got some more in stock and I've got it on the way.

Gigantea-2016-02-01_20.35.55-me.jpg

Next up, I might actually mod something, LOL!

Share this post


Link to post
Share on other sites

Back at it.  If you happen to be wondering about the mid tier kit that I'm using, it's all from my build last year save for the MB, which I had to switch to because of the mITX form factor.  I remember being so ticked off about the 980Ti coming out just after getting my 980.  But it's still very capable stuff and should make for a quick machine.

So let's start modding!  First things first, lets get this case torn down and see what we've got.

Gigantea-2016-02-08_22.21.37-me.jpg

That all came apart pretty well, except I did break the feet getting them out. sad.png  Guess I'll have to come up with some replacements.

Gigantea-2016-02-08_22.21.42-me.jpg

And the frame of our build.

Gigantea-2016-02-08_22.23.12-me.jpg

But, I do seem to have a lot more stuff than will easily fit in there, so let's make some extra room.

Gigantea-2016-02-08_22.35.26-me.jpg

Still looks like it's lacking room.

Gigantea-2016-02-08_22.46.49-me.jpg

That's better, but I NEED MORE SPACE!  Maybe these 2 extra CM Elite 130's will be enough.

Gigantea-2016-02-08_22.47.26-me.jpg

Share this post


Link to post
Share on other sites

you just killed that baby case and split its body in just one shot, I don't know what are the worse disasters coming after you get your stomach & brain full of beer    :D  (just kidding, I'm sure you'r doing a good job Bro)

Share this post


Link to post
Share on other sites

you just killed that baby case and split its body in just one shot, I don't know what are the worse disasters coming after you get your stomach & brain full of beer    :D  (just kidding, I'm sure you'r doing a good job Bro)

 

I just killed 2 more.  :)  But sometimes you have to tear something down to build it back better.  Or in this case, tear it down, cut it into small pieces and then rebuild it into something sort of terrifying. :D

Share this post


Link to post
Share on other sites

Continuing on, let's take a look at our other 2 test subj....er....patients.

Gigantea-2016-02-10_19.09.12-me.jpg

I almost hate doing what has to be done, but in the name of progress, they're getting the same treatment as the first 130.  That leaves us with this party of nine.

Gigantea-2016-02-10_20.50.35-me.jpg

Plus a few bits and pieces, of course, which I plan on incorporating along the way.  Maybe I'm funny, but I think being in the tower side of the competition, the end result should retain some idea of the original case, or at least something that ties it to the original.  But back to the task at hand, lets get these pieces arranged in some sort of order to approximate our final layout.

Gigantea-2016-02-10_20.51.07-me.jpg

I think I finally have enough space for all the components I want.   :D Next we need some way to put all this together, cause carting around 5 feet of computer connected with wires and and tubes would just be a nightmare.  Though, you might be able to roll it up.  Hahaha, a flexible tower.  But that's not what I'm doing.  I need a large piece of aluminum.  Meet "The Spine".

Gigantea-2016-02-10_20.53.23-me.jpg

Gigantea-2016-02-10_20.53.31-me.jpg

A 5' piece of 3/4"x1" aluminum tube ought to hold everything together just fine.  I still need to work out the spacing and a few other details, but here's the gist of what's going to happen.

Gigantea-2016-02-10_20.54.58-me.jpg

Gigantea-2016-02-10_20.55.05-me.jpg

 

Naturally, there's going to be a bit more to it than just screwing everything together.  That will have to wait for one of the next few updates, though, when I think I'll finally have to let the cat out of the bag about what Gigantea's final form will be.  But I did try to put some vague hints in the log so far if you want to take a stab at guessing it's nature. ;)

Share this post


Link to post
Share on other sites

Please tell me that when you are done, it will sit on your desk like that. :lol: You could re-name it inchworm.

 

I'd need a bigger desk then. LOL  I've been thinking about how many seats this would take up at a LAN!  Hinge it so you could roll it up like a sleeping bag and when you get to the event, just roll it out across a table! :P

Share this post


Link to post
Share on other sites

Nope, not a train.

Finishing up my last project has sort of slowed the start on Gigantea, but I have managed to do a little.  So before I get around to the idea reveal, let's hack up the PSU.  Cause that sounds totally safe, right?

I'm starting with a Cooler Master V850 that I took out of F3.  Since it was mounted on it's side with no back panel, I had it screwed down through it's cover.  That left a few ugly marks.

Gigantea-2016-02-14_18.29.39-me.jpg

 

So I'm going to cut those sides out and replace them.

Gigantea-2016-02-14_18.55.07-me.jpg

Gigantea-2016-02-14_20.53.26-me.jpg

It's a bit odd since the stamped lines are on the bottom side of the panel on one side, and the top on the other side, but oh well.  Now to put in some 2 way mirrored acrylic.  

Gigantea-2016-02-14_20.56.42-me.jpg

Gigantea-2016-02-20_23.54.13-me.jpg

I'll admit I completely stole this idea from the InWin H-Frame 2.0's PSU.  I really liked that look.  The problem now is that the 2 way acrylic needs light behind it to work, so let's grab a LED fan to replace the stock.  Except...

Gigantea-2016-02-14_18.39.23-me.jpg

It's a 135mm fan.  Poopadilly.  Ok let's order a LED fan.  Except...

Gigantea-2016-02-20_23.54.02-me.jpg

The only 135mm LED fan I can find is blue and I need red.  So I'm changing out some LEDs.  Now can I put it in the PSU...yep!

Fired up and running.

Gigantea-2016-02-21_11.32.04-me.jpg

And the side panels look pretty slick!

Gigantea-2016-02-21_11.29.56-me.jpg

But what I was really after...

Powered off

Gigantea-2016-02-21_11.34.31-me.jpg

Powered on.

Gigantea-2016-02-21_11.34.11-me.jpg

It does look clearer in person, the 2 way fools my phone pretty well and the low light doesn't help.  But this should put a nice red glow in the belly of this beast!

Share this post


Link to post
Share on other sites

Getting back to work on the case.  I need to make some end pieces.  Luckily, CM put an almost perfect front panel on the Elite for my needs.  Almost.

The original front panels and front section.

Gigantea-2016-02-23_20.31.03-me.jpg

Square doesn't really work for me though, so lets chop 'em and give them a little flair.

Gigantea-2016-02-23_20.46.04-me.jpg

Adding some aluminum panels to give them a little strength.

Gigantea-2016-02-23_21.16.22-me.jpg

Then I took out the grill section of the front panel.  It's not the look I'm going for and I really don't want to try to get the hex pattern under the grill to fit the new angles.  Wouldn't look right.

Gigantea-2016-02-23_21.29.26-me.jpg

I'll be cleaning these up a bit once I get a little further along and figure out what I'm replacing the grills with.

Now to start mounting pieces to the spine of Gigantea.

Gigantea-2016-02-24_20.00.56-me.jpg

Gigantea-2016-02-24_20.58.42-me.jpg

Gigantea-2016-02-24_20.58.51-me.jpg

As it stands, literally, it's now 6 feet 1 1/2 inches tall.  Taller than me. :(  I'm gonna have to do something about that next time.

Share this post


Link to post
Share on other sites

So this whole height issue...yeah, I don't want to be shorter than my case so I've got to do something about it.

First off, I need to find the center between my sections along the spine.

Gigantea-2016-02-25_20.38.02-me.jpg

And then draw some cool designs on it.  Cause cool designs add 20% to your overclocks.  True story. :p

Gigantea-2016-02-25_21.10.49-me.jpg

I then tried to kill my bandsaw by cutting out the angles that I marked on the spine.  I didn't kill it, but it was not happy with me.  Then I applied some heat and some pressure.  If it was a rock, I would have made it metamorphic.  I knew those geology classes would come in handy. :D

Gigantea-2016-02-25_21.56.51-me.jpg

I finished by metamorphosing it into a giant "S".  "S" stands for spine.  Or stupendous and super.  Or silly and screw loose.  You're call. :)

Gigantea-2016-02-25_22.08.54-me.jpg

I know it looks like a snake.  It's the first letter of snake.  Totally not going to be a snake.

Share this post


Link to post
Share on other sites

So I guess it's time to let you all in on my idea.  So first the name.  Gigantea.  It's the species name of a member of the Scolopendra genus.  S. Gigantea, more commonly known as the Amazonian giant centipede.

Gigantea-DSC_0042-me.JPG

Cute, ain't it.  And at up to a foot long, it lives up to it's giant name.  And, oh yeah, one bad mofo.  

So how did I come up with this crazy notion?  One day when I was trying to figure out what to do with a Cooler Master Stacker 935 when Knife Party's "Centipede" came on.  You know the song that samples the giant centipede vs. tarantula nature video.  I thought it'd be pretty crazy to split that top 915R into sections and give it some legs and make a giant computer centipede.  Crazy, I know.  One of my biggest hurdles was figuring out the legs...how to pull them off, what to make them out of, etc.  I got lucky enough to have won a case last year, and it just so happened that my idea for it included large, jointed(non-mobile) legs.   Hmmmm....perfect test.  So with a handle on the legs, I was ready to tackle the giant tropical centipede.  Unfortunately I couldn't find any CM 915s for the contest, but the Elite 130 is a close replacement, though it's about 100mm shorter front to back.  Rather than the two 915s I was planning on using, I went with 3 130's to make up the length and that's where we are now, 3 Elite 130s in pieces and a giant spine frame.  Now that you know where I'm headed, let's get to work!

With the spine bent into shape, I went and brazed the joints and then ground them flat.  I'll be pretty-ing them up with some filler once I start prepping them for finish.

Gigantea-2016-02-26_22.48.24-me.jpg

Gigantea-2016-02-26_23.17.34-me.jpg

Gigantea-2016-02-26_23.17.41-me.jpg

And a couple ground down joints.

Gigantea-2016-02-27_11.29.55-me.jpg

Next was to clean up what was the bottom of the case and add some strength to my sections.  Enter some .08" aluminum.

Gigantea-2016-02-27_10.24.18-me.jpg

The sections of case didn't need to be perfectly flat, but they did have some mounting points that I needed to level out.  First, let's try out a hammer, cause that would be the easiest.

Gigantea-2016-02-27_10.24.26-me.jpg

Just what I was afraid of, flattening out the raised sections pushed outward on everything else and gave it a curve.  Looks like I'm cutting the raised sections out.

Gigantea-2016-02-27_10.36.16-me.jpg

Gigantea-2016-02-27_10.36.22-me.jpg

Much better results.  Doing this 9 times over was a bit of a pain though, lol.

Gigantea-2016-02-27_18.40.39-me.jpg

Next was riveting the aluminum to the case sections and putting our mounting holes through the aluminum.

Gigantea-2016-02-27_19.22.54-me.jpg

After some evening out on the edges, I put them on the spine, because, well, I had to see how it looked. :)

Gigantea-2016-02-27_20.47.55-me.jpg

Gigantea-2016-02-27_20.48.04-me.jpg

Gigantea-2016-02-27_20.48.10-me.jpg

At nearly 30 inches tall right now, I'd say I've got the giant part down.  And I still need a body and legs! 

And my model, LOL!

Gigantea-27643150_201765_full-me.jpg

I'd say I'm pretty close.  I did roll the mid-section back at more of an angle to help with weight distribution.  Keeping this thing planted  and not crashing head first is going to take some work, and maybe some lead. :D

Share this post


Link to post
Share on other sites

Did a bit more work over the weekend.  Since this is supposed to be a computer, I guess I need to mount a motherboard in it somewhere, LOL.

I whipped up a nice little platform for the MB out of some .08" aluminum.  The stuff is a bear to bend well, but very stout.

Gigantea-2016-02-28_20.59.01-me.jpg

Gigantea-2016-02-28_20.59.07-me.jpg

Gigantea-2016-02-28_21.00.48-me.jpg

Gigantea-2016-02-28_21.01.06-me.jpg

It's got a seat up front and center.  I'm not quite done with it though.  After getting it mounted up I've decided it needs more, so I'm actually going to add a piece of 1/4" acrylic to the top of the tray and edge light it to give it a glowing effect.  But that's for next time.

Share this post


Link to post
Share on other sites
12 hours ago, ToddK said:

Wild!  I like it.

 

12 hours ago, Mosquito said:

Nice work!  Looks creepy lol

Wild and creepy...I'm on the right track!  Thanks guys!

Share this post


Link to post
Share on other sites

After staring at it for a while, I changed the motherboard mounting a bit.  I decided to reduce it's height off the back plates and instead of adding a layer of acrylic to the tray, I just made the tray of acrylic.  By switching to just the acrylic for the tray, I reduced some complexity and also made attaching the brackets to the plates a whole lot easier.

Gigantea-2016-03-01_20.35.38-me.jpg

A 1" rise off the back plates instead of 2".   Looks tighter and will help with some things in the future.

Gigantea-2016-03-01_20.35.32-me.jpg

Next is the GPU.  I thought mounting it would be a little tricky, but I turned out to be pretty straight forward.  I had been thinking of ways to attach brackets to the backplate, but I didn't really like that idea since it would ruin the backplate for any future use.  I've already hacked the I/O bracket on this card to pieces for the last build it was in, I really didn't want to ruin the setup any further.  Since the backplate is held on with M3 screws, I decided I could use some M3 standoffs in their place and pretty much treat it like the motherboard, but with the standoffs reversed.

Pulled the backplate and added the standoffs.

Gigantea-2016-03-01_20.30.32-me.jpg

Then I used the backplate for a template for my acrylic GPU tray.

Gigantea-2016-03-01_20.30.43.jpg

Mounted to the GPU.  It's got good clearance, so I'm not too worried about any heat build up.

Gigantea-2016-03-01_20.47.47-me.jpg

And the GPU mounted with the same style of brackets I used on the MB tray.

Gigantea-2016-03-01_21.50.57-me.jpg

Gigantea-2016-03-01_21.51.12-me.jpg

Gigantea-2016-03-01_21.51.22-me.jpg

With all the hard work done mounting these two, all that's really left for them is to frost the acrylic for the LED lighting and figure out some way to pretty up the brackets.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now