Kazuma 10 Posted October 15, 2017 Hey Guys! Got another incoming project in partner with EVGA, CoolerMaster, Zadak511 and Thermaltake! CoolerMaster was generous enough to throw in one of their most gorgeous computer case, the MasterCase Maker 5T! And I will be calling this project "OverDrive". This is one of the things that I love about this piece of gorgeousness, the top handle. And here's a few more photos of this gorgeousness. EVGA showed their awesomeness again with their support by sending in some of their awesome hardware! I'll be using some of Thermaltake's newest fittings, the Pacific M-Pro fittings. And here's their new Digital Temperature Sensor/Indicator fitting. And here is the second reason why I am soooooo pumped with this project. I will be using a pair of bad-ass looking RAM from ZADAK511. Shield RGB DDR4 16gb RAM! These looks awesome out of the box! Well, the unboxing of it was a puzzle but yet one of the most amazing unboxing I have ever experienced. When I opened the box up, I was surprised that there were some compartments/dividers. I'm like, "wuuuuuuuut is this??" So I started pulling them out and then, well, see for yourself. The thing came with patches, a lanyard, some gloves and a SSD! In case you were wondering "I thought it was supposed to be DDR4 RAM?", well, that's exactly what came into my head when I opened it up. Remember what I said above that the unboxing experience of this was a puzzle? The DDR4 RAM were carefully hidden on top. There was a piece of cardboard that you need to pull aaaaaaaand... Don't they look amazing? So after pulling all those out, I thought that was everything, buuuuuuuut! I accidentally pulled the piece of box where the RAMs where sitting, and what I found was just amazing. It came with Google VR Cardboard! After discovering the VR cardboard, I have spent probably 20 more minutes trying to see if there are more hidden loots in that small box. But sadly, that was all. But still, the loots that came with the box really surprised me. Well, there's more photos to come but that's it for me for now. See you guys in the next update! Ciao! Quote Share this post Link to post Share on other sites
Bill Owen 357 Posted October 16, 2017 Interesting...never heard of ZADAK Quote Share this post Link to post Share on other sites
Kazuma 10 Posted December 12, 2017 Hey Guys! It's been a while since I started this project and I think its time for some update. A month ago, I started to do the front custom front panel for the project. First off, acrylic sheet! By the way, you will see a lot of "Blue" color on this update since I was using a painter's tape to draw my cut on the acrylic and aluminum sheets. After drawing out the cut that I wanted, I headed down to our "creepy" basement and started the cutting procedure. After cutting and trimming off, it was time to use my DIY acrylic sheet bender. And while I was down in the creepy basement, I decided to do the side cover for the project. A couple of week after I did the acrylic cuts, I then moved on to the aluminum cutting part of the custom front panel and side cover. I was using a 2mm and 2.5mm aluminum sheet. The same process was done here. Sketch out the design/cut on the painter's tape covered aluminum sheet and start the ear-destroying cutting. My first tool of choice to use was my Dremel Motosaw. But...... With all the vibrations that the motosaw is producing plus a not-so-stready hands of mine, I ended up snapping 5-6 blades. So I decided to go with the more "louder" of cutting method.... JIGSAW! Time to bend this baby up! While I was at it, I decided to do the other 2 small parts of the front panel which will basically cover both sides of the front panel. Test fit! I was using double sided tape to mount the custom front panel. After the aluminum front panel part, a week after I finished it, I moved on to doing the side cover aluminum cut. All of these aluminum cuts will be overlaid on top of the acrylic. Same process, I drew in the design that I wanted, and I added the logo of Zadak511. First attempt of cutting this out using the motosaw was a fail. I was going to try it again but then I realized....... I RAN OUT OF DAMN MOTOSAW BLADES! So instead of doing it manually, I ended up throwing it to the CNC after some minor design changes to get this to fit into the CNC bed. A week ago, I stared to do some small test with the paint job since I live on the "Frozen Tundra" side of the earth, The weather temperature when I tried the paint job was -5c. The paint job somehow worked (using some tips from pro modders which is basically warming up the part that you will be painting and soaking your spray can into lukewarm water before using it), and I am just waiting for the paint to completely cure (in this kind of case, I usually wait for a week or a bit more before I attempt to handle the painted parts). Next update will be the result of the paint job and will be the custom PSU shroud that I was planning on doing. Next update will be next week, and give it a week or 2 more, and this project will be done! See you in the next update! Ciao! Quote Share this post Link to post Share on other sites
Kazuma 10 Posted December 12, 2017 On 10/16/2017 at 10:50 AM, Bill Owen said: Interesting...never heard of ZADAK Yeah, I just heard the company from a friend of mine who got sponsored by them. I saw their DDR4 RAM, and I just fell in love. LOL! Quote Share this post Link to post Share on other sites
Cheapskate 49999851 Posted December 17, 2017 Looking great. For scroll saws, I'm not sure how well it would work with the dremel, but adding a block of wood to the table lets you use the section of the blade that didn't get dulled. I mean, you only use about 1" of the blade, so if you move the work area to where you have fresh blade... :D Quote Share this post Link to post Share on other sites
Kazuma 10 Posted December 29, 2017 On 12/17/2017 at 11:01 AM, Cheapskate said: Looking great. For scroll saws, I'm not sure how well it would work with the dremel, but adding a block of wood to the table lets you use the section of the blade that didn't get dulled. I mean, you only use about 1" of the blade, so if you move the work area to where you have fresh blade... :D Hmmm. I'll keep that in mind. I know I tried it before but was kinda afraid to lose a finger because of the vibration that the bed was producing. LOL! Quote Share this post Link to post Share on other sites
Kazuma 10 Posted December 29, 2017 Final Update: Hey guys! Finally, the last update for this project! A few weeks ago, I went ahead and did the custom PSU shroud for this project. I wasn't planning on making one but for some reason, I did. One of the things that I hate the most when doing a project around the last quarter of the year, paint job! Where I live, the temperature goes down to around -5c around October and will continue to go down, so doing paint jobs on that kind of temperature is a pain in the butt. But after hearing a few tips and tricks from the pro's, the paint job came out better that what I would normally expect. While waiting for the paint to dry up, I went ahead and did the last cutting part for the project. A few details for the PSU shroud using 2.5mm aluminum sheet. Did a quick paint job on the PSU shroud cut out, waited for a week and did the assembly test to see how it will look like. After that, I then proceeded on putting the thing together. This, this was a last minute decision since I couldn't find any waterblocks for the EVGA 1070 card, and that decision was worth it. This thing looks absolutely sexy. Waterblock for this build. 2017 = RGB. First plan was to do a dual loop, on dedicated for the processor and another one for the GPU. The only problem with that plan was, I had some really hard time running the tubes around. Although I have small, dainty "Asian" hands, I still had troubles putting the loop together, so I decided to just go with a simple loop. Aaaaaaand, after filling the loop up and did a test leak, time to put everything together and light this baby up! Powering this baby up, with all the RBG strips inside, the room became a rainbow paradise. This was my initial rendering. I must say, I am quite happy with where I ended up. Sure, the plan for the loop didn't work, but hey, the project still turned out pretty cool. And it was close enough with the rendering, so I'll take that any day! Well, that's a wrap for me this year! For those people who kept on visiting my work logs, thank you very much! Time to move on to the next project. Probably a scratch build. You guys have a great holidays! Ciao! Quote Share this post Link to post Share on other sites
Cheapskate 49999851 Posted December 31, 2017 Came out pretty sweet. Yes, You need to do a scratch build. :D Quote Share this post Link to post Share on other sites
Kazuma 10 Posted December 31, 2017 On 12/29/2017 at 9:26 PM, b2bk said: very nice Thanks! 42 minutes ago, Cheapskate said: Came out pretty sweet. Yes, You need to do a scratch build. :D Thanks Cheaps! Yeah, For the past 2 years, I think I wasn't able to do any scratch build projects.Although I couldn't decide which one to do, a vehicle from a popular game ("Buggy" from Players Unknown Battle Ground), or one of those futuristic/sci-fi crates/box. Quote Share this post Link to post Share on other sites