Jump to content

If you are having any issues logging in please contact: kyle@themodzoo.com

Sign in to follow this  
Envious Mods

"Replicant" CaseMOD Invitational (Blade Runner 2049)

Recommended Posts

PicsArt_05-14-05_33_25.png.d153d87e3c684c3069bcaa2db990c299.png

 

New Thermaltake Trio Fans Arrive:
I was fortunate to get a set of the new Thermaltake Trio addressable fans which will fit in perfectly with the Replicant look. I'm using a lot of different Thermaltake addressable leds so that I can use them to help set the scene or feel that I'm going for. I will post videos showing the Voice Controlled Thermaltake app and what can be done when all this RGB is tastefully used in order to set a scene in a mod.

PicsArt_08-09-05_09_40.thumb.png.025eda44ce46841244972e806ffcf64d.png

Quad Thermaltake R11 Reservoirs Arrive:
The 4 small Thermaltake reservoirs arrived and now I can get a better idea of of placement. I'm came up with a neat idea by combining 2 reservoirs to make one epic and original looking reservoir. Since I have a dual loop it'll have a matching setup next to it.
 

PicsArt_08-09-05_17_55.thumb.png.f2df405bd148969b9bbdcb653e937494.png

Share this post


Link to post
Share on other sites

PicsArt_05-14-05_33_25.png.d153d87e3c684c3069bcaa2db990c299.png

 

Lian Li Strimer RGB Cables:
I decided to use the Lian Li Strimer RGB cables for the 24-pin. The Blade Runner 2049 theme fits these cables perfectly. I can't wait to try them all out for sure.

PicsArt_08-08-08_02_25.thumb.png.6db85c8797b5868532aca64349a19593.png

Reassembling Painted Panels:
Due to always liking to be exact I have to do some added sanding in order to get everything to fit perfectly after paint. Made it a little tricky and definatly ate up a bunch of time.

PicsArt_08-10-04_08_51.thumb.png.569de8929db5a0211262a094f86c1708.png

PicsArt_08-10-04_11_26.thumb.png.b3c2a02cd6cdcbae9d07c20947c1fe18.png

Share this post


Link to post
Share on other sites

20180804_154934.png.9923e63b096a7818e9a397f9f5ebffb8.png

Hardware is starting to arrive.....

 

Hardware Specs:

Motherboard: Asus X470 Crosshair VII

CPU: AMD Ryzen 7 2700 
Graphics Card: Asus Strix GTX 1070
Ram: Gskill RGB TridentZ DDR4 (16gb)
Storage: Plextor 512gb NVM PCIE SSD
Power Supply: Thermaltake iRGB 850w
Cables: Lian Li Strimer & Thermaltake black and white sleeved extensions
Fans: Thermaltake 120mm Trio RGB, Ring Plus & Pure Plus.

Watercooling: Thermaltake dual pumps, 4 reservoirs, 480mm copper radiator, 4 X 120mm radiators, Pacific W4 Plus CPU block, GPU waterblock, 3 digital led controllers, Sync controller, 2 X inline digital temp sensors and white 16mm C-Pro fittings

 

IMG_20180810_212052_459.thumb.jpg.bbf76f6b768ca5e8c90f8d05ea23018c.jpg

PicsArt_08-10-08_50_29.thumb.png.e4240d1cbab66b4639ff2f7c60f9e541.png

PicsArt_08-10-08_41_34.thumb.png.b4cc59d65fe87b2dd525255a74575756.png

PicsArt_08-10-08_47_32.thumb.png.fd1fab7d218a520a6ed3ea10e194c17b.png

PicsArt_08-10-08_04_45.thumb.png.c115877c7198e889d7f947bf5e4c030f.png

PicsArt_08-10-08_21_09.thumb.png.40b47a6fb93f297f63c2b77843a793dc.png

PicsArt_08-10-08_16_36.thumb.png.f75b319d000538e5b86966befc9d568d.png

PicsArt_08-10-08_27_07.thumb.png.64941bba4062b715b8988700f93e9fcf.png

PicsArt_08-10-08_34_55.thumb.png.974e60fd72f4b81aa18904f62732601f.png

IMG_20180813_212329_151.thumb.jpg.c95f11d96ca83e72a769e1bd1ab4f5bd.jpg

 

Share this post


Link to post
Share on other sites

20180804_154934.png.eade0954dac8dbe37ceba4a9a6b36087.png

Trying Out Different RGB Settings:
Thermaltake offers a large line of various led products. I will be using a good majority of them. I decided to get a jump on learning how to program them. The new Ring Trio Fans are pretty awesome. I like how you can custom layer colors and effects. Most digital leds I've used are pretty limited but these really allow you to do all sorts of things. So far the best setting is with both putter rings all White and the inner ring purple to match the build. I'll try out more combinations once I get the motherboard installed.

PicsArt_08-17-04_40_55.thumb.png.0ed1426af01411e838857bcb140e7e78.png

Video of The New Trio Fans Effects:

VID_331890317_053058_384.mp4

Plextor M9Pe PCIE SSD Mods:
I really wanted to take the opportunity to mod as much as I could in order to show my versatility. I've never modded a pcie SSD so I took the chance to mod the Plextor M9Pe. Since the gpu is inverted in my build I want to mount the SSD as high as I could so that it can be seen. The stylistic heatsink on the M9Pe inspired me to make a backplate. Due to the tight tolerances of the backplate it was very time consuming to get perfect. I can't wait to see what it looks like once it's totally finished.

PicsArt_08-17-04_32_02.thumb.png.92b19aa705f2281a4bc2f404782a177b.png

Share this post


Link to post
Share on other sites

20180804_154934.png.c7d8dfc8c12feb047d0a5ec37b92640c.png

 

Asus X470 Crosshair VII wifi Motherboard Arrives:
I've got to say this is a killer looking motherboard. Asus has design cues in most of their products that match my natural design style so it's a good fit. I took the opportunity to start mounting the Gskill RGB TridentZ DDR4 like, AMD Ryzen 7 CPU and Thermaltake W4 CPU block that I've already modded earlier on in the competition.

PicsArt_08-18-04_26_50.thumb.png.9809bc5e155c1af9ae000c188cba66c9.png

IMG_20180818_162745_521.thumb.jpg.05a0f1c3bd4b5b9fccedb76464208cc5.jpg

PicsArt_08-18-04_23_30.thumb.png.86c4235ff9d93801b9cb83ffe64ebdb9.png

IMG_20180818_155648_318.thumb.jpg.8746fdc19aed0bf9e255e572931fdf91.jpg

PicsArt_08-18-04_09_50.thumb.png.c91d289d357b0d77ceb0d7c565deb08b.png

Thermaltake GPU Waterblock Arrival & Mods Planned:
The Series 10 GPU block arrived so that I can start designing the mods for it. These GPU blocks look great right out of the box but I wanted to take it to the next level. To start out I took measurements so that I could start designing the custom pieces that would make up the new plates.

PicsArt_08-18-04_13_17.thumb.png.40ff83702788c615c075d47681daeda3.png

 

Share this post


Link to post
Share on other sites

20180804_154934.png.7b5ccec5560d62ad878d810b7541a396.png

 

Finishing up Plextor M9Pe Mods:
Now that all the acrylic is glued it's time to paint it all flat black. It looks someone dark in the photos but the interior leds will make it easily viewable once finished. I also decided to custo. The Plextor logo out in white and purple vinyl which brings it all together.

PicsArt_08-21-01_37_26.thumb.png.a32a030dd67c757abbb1ef8b07abfc02.png

Mocked up Hardware in Replicant:
While finishing up the hardware installation I also decided to mock up the Lian LI Strimer RGB Cables. I can't wait to fire these up as they couldn't first a build much better than a Blade Runner 2049 themed build. I also allowed me to make sure I had the best location for the Plextor ssd that I modded. You will be able to see it just as I imagined. It fits the theme and hardware styling very well.

PicsArt_08-21-01_42_05.thumb.png.44ad60c31fceb5cf1385d92c2fdb9c18.png

Share this post


Link to post
Share on other sites

20180804_154934.png.813c086bfffa616db03ef27e28d77db7.png

 

Thermaltake D5 Pump Mods:
I've already custom sleeved the wiring from D5 pump but, I wanted to also make some custom plates since I'm showing the back of the pumps. The design I came up with not only fits the theme of Blade Runner 2049 but it ties it into the rest of the build. The acrylic I used is matte black which gives it an original look. I custom cut purple vinyl to go behind the inserts so the it has some contrast.

PicsArt_08-17-04_45_16.png.3e580cb065308e49debc2e87f17d85b6.png

 

Gskill TridentZ RGB Ram Mods:
I decided to do some mods to the Gskill RGB TridentZ DDR4. I've done custom paint before but I wanted to do something I've never seen done that'll also fit the Blade Runner 2049 theme. I made an acrylic insert and etched a Gskill logo which when lit up it'll look like the neon signs found within the movie.

 

PicsArt_08-21-01_52_33.thumb.png.bceb7d4dcc33051c1a544e3639c731f5.png


Thermaltake Pacific 10xx Asus Strix GPU Waterblock Mods:
One of my goals for this build is to make it all look like 1 cohesive design. I could have left the waterblock stock as it already looks sweet but, I had to make it my own. I also wanted to use some special matte acrylic to give it a more industrial look. I couldn't be more happy with the mods for the waterblock and I can't wait to see what it looks like once the block I'd backlit.

PicsArt_08-21-01_46_49.thumb.png.4797a717c77c1ae4206cdf7f612cea27.png

PicsArt_08-21-01_51_14.thumb.png.1524b5021efb1be4922b92a0c765e3e9.png

 

Share this post


Link to post
Share on other sites

20180804_154934.png.8423c45d4b2d1af70852b21e48da7c86.png
Custom Mixed Coolant Ideas:
I rarely use standard colors when deciding on coolant choices. Thermaltake makes a clear C1000 coolant and offers up a large variety of dyes to make your own colors or tint pre-made colors. The color for the GPU loop will be purple. I added a touch more blue to get the tint I wanted. For the cpu loop I've been playing with all sorts of ideas from turquoise to lime green, pink and even a more violet/red color. The advantage of going with something like lime green is that it will make the build really pop. The pink and purple really fit the Blade Runner 2049 theme though.
PicsArt_08-24-02_11_13.thumb.png.249160e9e69b1eafae13306072cb1277.png

PicsArt_08-24-02_24_58.thumb.png.b39d02402c3933e8f1a140dc0834c9fd.png



Running 16mm PETG Hardline Tubing:
Deciding how you run the hardline loop can make or break a build. I'm very particular when it comes to making a loop that fits the theme, layout, design and that the bends/runs are perfect. I've been known to completely redo a loop if it's not exactly what I'm looking for. I want this one to have a semi-industrial look whither some angled tubes. Since I'll be doing lots of precise bends I decided to use Thermaltake mandrels and so far they've worked great. I still have more tubing to run but I've got the main features finished.
PicsArt_08-24-02_06_22.thumb.png.0ac6b2ad4d636f4236ccf1d56775f2cd.png


Finishing up GPU Mods:
I decided to swap the purple ROG logo for a matte black one that gave it a more cohesive look. It'll also look much better once the gpu is powered up due to the backlights. I can't wait to fire it up!

PicsArt_08-24-02_00_40.thumb.png.c0e72e44108fe9120f4a371c6668aba4.png

Share this post


Link to post
Share on other sites

20180804_154934.png.8423c45d4b2d1af70852b21e48da7c86.png
Painting 90 Degree Fitting Caps:
Since I'm using Thermaltakes new C-Pro white fittings I wanted to match the caps on the 90 degree ones that come in black or chrome. Once painted white they'll match the rest of the loop. I could have easily not painted then but I like to try and match up everything in the build. I tried a new Universal Bonding Primer since fittings get a lot of wear and tear. This should help give a good platform for the paint to grab on to. I will probably clear them with a matte or dead flat clear coat as well.
PicsArt_08-29-01_47_35.thumb.png.4cd7f0bf93a70ab9a55bd1620dfa1f19.png


Custom Front Switch Panel Mods:
I could have left the top USB, headset and power switch that comes on the case but, it's a mod competition. So I went full on custom and molded it into the custom panels I built for the top. I added an anti-vandel switch to turn on the PC as well as a custom acrylic Replicant to it which does a great job of tying it all together.

 

The tiny letter that make up the Replicant logo were very hard to do. Upgrade used the negative acrylic pieces to help keep it aligned as I chemically welded it together. The switch is a halo ring so it'll illuminate white when the system is powered. I'm going to save this part to unveil in the final photos; coming soon

DIY Fitting Cap Covers:
The 2 caps on the gpus waterblock are on the outside and inside wanted to do something to give them a sharper look. I tried etching the acrylic which looked great from the back but wasn't up to my standards. I then came up with the idea to etch the Thermaltake and Envious Mods logo mirrored so I could flip them over which gives a more polished look. I'm also playing around with custom Blade Runner caps for the reservoirs. I haven't got them just right yet but I'll redo them until they're perfect.
PicsArt_08-30-12_45_16.png.7c4f585a74ec3d422d7947f77900968b.png

PicsArt_08-30-12_48_59.thumb.png.25ec9653d066ea6ad4b4b837b037d079.png

PicsArt_08-29-11_16_07.thumb.png.05c53a2c9e896b10a5c3aef93f04e568.png

 

Sneak Peek on Next Updates!

IMG_20180824_234936_211.thumb.jpg.4004686573a98d2543db48ca6601223b.jpg

 


 

Share this post


Link to post
Share on other sites

20180804_154934.png.4797f3b6a926e85c86180faefe08109e.png
Testing Out Ring Trio & Ring Plus Color Schemes:
Before I pulled it apart to do wiring I wanted to test out different color schemes to see if I wanted more white or more purple. It always looks different on camera. After a couple shots I could quickly tell that it looked better with more purple. Once finished there's a lot more leds that will be used in different colors but this gives me a good idea of what it'll look like.
 PicsArt_08-30-01_21_13.thumb.png.3ea69a8095456eb5d470391831b17ef8.png

PicsArt_08-30-01_13_49.thumb.png.cddfde7de20c6d4038b44c701d562c6e.png

PicsArt_08-30-01_19_47.thumb.png.c84e3e1a3be6bc21816582386629583c.png

PicsArt_08-30-01_18_17.thumb.png.41129ffe6c0c58527d584344e8689811.png

PicsArt_08-30-01_16_26.thumb.png.b29f624a54eccc1493e8e43f99e1817f.png



GPU Distrobution Block:
I've always wanted to make my own distrobution block that's a bit different from what I've seen. I had one on my Dark Matter scratch build that was done about 4 years ago. I decided to take advantage an design a custom distrobution block to link the GPU to the pump. I'm working on a bolt together distrobution block method but for this application is decided to do a sealed unit. It is about an inch thick which will offer up more than enough flow. An internal piece was added to promote proper flow and reduce unwanted turbulence.

PicsArt_08-30-12_41_39.thumb.png.9204467883933a2f5404027c549caf8d.png

PicsArt_08-30-12_53_05.thumb.png.ac1e4530ae76285ce7338435a25f9857.png

PicsArt_08-30-12_37_43.thumb.png.3dc899061cdbf79af99235ac06bbf978.png

Share this post


Link to post
Share on other sites

20180804_154934.png.4797f3b6a926e85c86180faefe08109e.png
Testing Out Ring Trio & Ring Plus Color Schemes:
Before I pulled it apart to do wiring I wanted to test out different color schemes to see if I wanted more white or more purple. It always looks different on camera. After a couple shots I could quickly tell that it looked better with more purple. Once finished there's a lot more leds that will be used in different colors but this gives me a good idea of what it'll look like.
 PicsArt_08-30-01_21_13.thumb.png.3ea69a8095456eb5d470391831b17ef8.png

PicsArt_08-30-01_13_49.thumb.png.cddfde7de20c6d4038b44c701d562c6e.png

PicsArt_08-30-01_19_47.thumb.png.c84e3e1a3be6bc21816582386629583c.png

PicsArt_08-30-01_18_17.thumb.png.41129ffe6c0c58527d584344e8689811.png

PicsArt_08-30-01_16_26.thumb.png.b29f624a54eccc1493e8e43f99e1817f.png



GPU Distrobution Block:
I've always wanted to make my own distrobution block that's a bit different from what I've seen. I had one on my Dark Matter scratch build that was done about 4 years ago. I decided to take advantage an design a custom distrobution block to link the GPU to the pump. I'm working on a bolt together distrobution block method but for this application is decided to do a sealed unit. It is about an inch thick which will offer up more than enough flow. An internal piece was added to promote proper flow and reduce unwanted turbulence.

PicsArt_08-30-12_41_39.thumb.png.9204467883933a2f5404027c549caf8d.png

PicsArt_08-30-12_53_05.thumb.png.ac1e4530ae76285ce7338435a25f9857.png

PicsArt_08-30-12_37_43.thumb.png.3dc899061cdbf79af99235ac06bbf978.png

20180804_154934.png.54f60ea1b6251ee495c6c0e9fa2b3b94.png
Running All That Wiring:
Now that I have the hardline tubing run its time to start dismantling the psu shroud so that I can run all the wiring. There's more wiring in this build then most due to all the RGB I decided to use so that I can get the Blade Runner look I'm going for. Fortunately I pre-planned some of the cable routes so it'll all fit cleanly within the custom cable management piece I built.
PicsArt_08-30-12_33_54.thumb.png.2340d4d4c88a2189bd03b47216f89db9.png

Custom Envious Mods GPU Insert:
I noticed a little pocket in the Thermaltake gpu block where the power plug goes so I decided to custom make an Envious Mods logo that is a perfect fit. The cool part is that I can swap in and out other ones for shows etc.

PicsArt_09-02-04_21_20.png.2cf9e67efff582a7e7a57fbce392b0cf.png

 

Share this post


Link to post
Share on other sites

20180804_154934.png.54f60ea1b6251ee495c6c0e9fa2b3b94.png

Drain Ports:
Drain ports are an important part of any system. I've decided to put mine at the pump outlet which is at the bottom of the system. Once I have a chance to leak test and drain I may add another access port but this should work to get the majority of both loops drained. I wanted to add a custom made acrylic panel that holds the drain ports in postition. This is primarily for aesthetics as it keeps both ports in position and also gives it a Blade Runner look. I will paint them flat black before final assembly.
PicsArt_09-04-06_39_44.png.7d44b9c4c0c750e231589f2be5677472.png

PicsArt_09-04-07_17_07.thumb.png.e0c4eb0fb1f0b84f848770e7e834dfce.png



Attempt at Programming Thermaltake Addressable RGB Products:


I still need to do more research to learn how to properly program all these RGB products. If your just doing a few items it's pretty straight forward. I decided to do just about every product they own which makes it much more complicated. The reason it's more difficult is because I'm linking multiple controllers and running part of them off the Asus motherboards software through Thermaltakes new Sync controller.

So far I've got the 4 Ring Trio Fans and the Ring Plus Fan setup as well as the Lumi strips. The cool part about running some RGB devices through the Thermaltake SYNC and others through the Plus controllers is the ability to create different looks and effects. I plan on doing a video to show some of the features and voice control via an android phone. You can check out the different patterns I tried as well (video)

 

VID_120061207_021454_271.mp4

Share this post


Link to post
Share on other sites

20180804_154934.png.54f60ea1b6251ee495c6c0e9fa2b3b94.png

Final Assembly:
It's my favorite time of any case mod; final assembly! I'm doing some of the final stuff in a bit different order than usual. I'm waiting to put on the two side shrouds until after leak testing so I can see all the watercooling fittings and connections. I was a letter to snag a few pics during the process. I still need to play with the dye a little to get the exact shades I want.

PicsArt_09-09-03_15_32.thumb.png.4d223aabf509ff3cab09c341ce14880f.png

All Booted Up!
The moment of truth........when you flip the full power switch for the 1st time. It took me an hour just to flip the switch for the 1st time. It's that moment when it'll all be good or really bad. Fortunately it all went well.

Installing Windows 10 was a breeze on the Plextor M9Pe PCIE SSD. It was definitely one of the fastest installs I've done. After that it's time to install all the Asus utilities and drivers for the X470 Maximus Crosshair VII wifi + STRIX GTX 1070 gpu. Next up was installing the software for Thermaltakes new RGB software (V2.2). It took a bit to figure out at 1st but I got the hang of it after swapping around a couple things.

PicsArt_09-11-06_31_50.thumb.png.ef94f536d7f699452745f1c75d20e02e.png

 

Share this post


Link to post
Share on other sites

PicsArt_09-15-07_29_04.thumb.png.2e59f0906021f34a5a414726361b0b24.png

It Comes to an End:

I can't thank you all enough who have supported the "Replicant" case mod. I'm amazed at the amount of support and positivity that has been shared with me. This competition was quite the journey and seeing Replicant finished; I know the extremely long hours were worth it.

I manged to push myself further than i ever have before while assuring that every piece is clean looking and achieved at my high standards. I pulled off my goal to touch every single piece and mod it in one way or another. Everything was done in house and with my own hands; the end result is something I'm extremely happy with. Thanks again and make sure to place your vote!

••Make SURE to VOTE for the Replicant CaseMOD Invitational build••
 

926788762_Sponsorswatermark-2.thumb.png.3eb48be7545d1626706b24c48119cc7d.png


Thank You to our Sponsors!
Thermaltake - ASUS - AMD  - Plextor - Gskill - ROG - Luxa - TT Esports


A massive thank you goes out to our Sponsors as the Replicant case mod wouldn't have been possible without them! Thermaltake also did a great job helping us all out with anything we needed. They have some wonderful employees that truly love the sport of Competitive Modding!

Hardware Specs:

Motherboard: Asus X470 Crosshair VII
CPU: AMD Ryzen 2700
Graphics Card: Asus Strix GTX 1070
Ram: Gskill RGB TridentZ DDR4 (16gb)
Storage: Plextor 512gb NVM PCIE SSD
Power Supply: Thermaltake iRGB 850w
Cables: Lian Li Strimer & Thermaltake black and white sleeved extensions
Fans: Thermaltake 120mm Trio RGB, Ring Plus & Pure Plus.
Accessories: TT Lumi Plus addressable leds strips, 5" touch screen monitor, vandal switch

Watercooling: Thermaltake D5 dual pumps, 4 X reservoirs, 480mm copper radiator, 4 X 120mm radiators, Pacific W4 Plus CPU block, GPU waterblock, 2 digital led controllers, Sync controller, 2 X inline digital temp sensors and white 16mm C-Pro fittings

Final Photos & (Video Coming soon):

ASUS_X470_2.thumb.jpg.ec2cdaded608b50c8ab971a349c16585.jpg

DISTRO_PUMP_FINAL.thumb.jpg.f1404f2bf6d10c5bdb1798f6789ff328.jpg

GSKILL_TRIDENTZ.thumb.jpg.1fc56322ef3e9a171e9f1ca0db3e55d8.jpg

CM_ROCKET.thumb.jpg.c08cddadb13f61a1537e01a4a9fd39a1.jpg

BEST_CPU_RAM_RUN_SHOT.thumb.jpg.2cf1526a5d5e4480e01e3bff17cf635b.jpg

FRONT_GRILL_AND_ORIGAMI.thumb.jpg.202ad460e225fc4e32aedb93809f2402.jpg

TT_850w_PSU-vert.thumb.jpg.cfaf5cbaebed2d295f2168113360145d.jpg

20180916_033021.thumb.jpg.120b4c6904cf11118fa079b86bcc9a72.jpg

TT_CONTROLLERS.thumb.jpg.0e68d0900012c8098e45598c78dc688a.jpg

ASUS_STRIX2.thumb.jpg.0617ffc5f62898d71779fa7aaa5ee082.jpg

FANS_LUMI_LOW_ANGLE.thumb.jpg.fd6d636e53eba6eeb40178fbdc7da4be.jpg

PLEXTOR-2-vert.thumb.jpg.4fde014e04d6c8c8e81737a758827125.jpg

338909061_Tt_PSU__screen-vert.thumb.jpg.ce2c61c17716e1250d09c3f2f45cee09.jpg

ASUS_STRIX_GP.thumb.jpg.622e28c3a69688bbb64a47a35f97bb20.jpg

FR_LOW_SIDE_UP.thumb.jpg.60581166fe28174538a60c3f61bb12fa.jpg

SIDE_SHOTS.thumb.jpg.ff64cfffc7a2a4c83dbcce7feadb18c1.jpg

Sponsors_watermark-2-vert.thumb.jpg.50dbcedf63c6f05242f19949b69adac4.jpg

LIAN_LI.thumb.jpg.cd15f6eaa34d834a2637972f9da4299b.jpg

Tt_comp-vert.thumb.jpg.45db68ac478543056f25fe1c9b5eec1e.jpg

BACK_PANELS.thumb.jpg.84ea82917948e662487588db85adaf5f.jpg

Tubing_run_GPU-vert.thumb.jpg.b8b5aa50681555c5744c1614b7a1d58c.jpg

BEST_INSIDE_EM_LOGO.thumb.jpg.cde8959ae144086e3a1ff040cd8b8006.jpg

DARK_SIDE_SHOT.thumb.jpg.aaa21d4bc442358949a62aa8b29b4287.jpg

INSIDE_FULL_SHIT_H20.thumb.jpg.84a28a2eb10c20b713487d1729ae0249.jpg

EXTREME_UP_ANGLE_BACK_CORNER.thumb.jpg.4191a91146f29419b54ace1ebcc3cb83.jpg

IMG_20180915_115643_357.thumb.jpg.3bb1ec05741aaf7d50c6d14aac1f3e1a.jpg

IMG_20180914_005047_783.thumb.jpg.4d3abcc54a04e1ad87128ec434200284.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

    Chatbox
    There's a thing here. Somehow it moved to the top of the page, but I didn't do it. No, really! But still, Cheaps is likely to blame...
    You don't have permission to chat.
×