Jump to content
Dirty South Pc Mods

"Cyber Spyder" Color change Pink/Black CoolerMaster HAF 922 Build.

Recommended Posts

Hey guys whats up I'm Nick other wise known as Dirty South PC Mods. Going to be working on a build for my Gamer Girl that likes Spiders.

First off I would like to thank my Sponsors.

BSMODS_zpsf5e3f4c3.png

http://www.bsmods.com/

Icemodslogo_zps8f3f7b00.jpghttp://www.icemodz.com/

Thank you for your support :D

Ok so lets get this build started.

DSCF1501_zpsb926f7b1.jpg

DSCF1521_zpsa575d027.jpg

Ok here is our Motherboard an ASRock Z77 Extreme 4 1155.

DSCF1522_zps20eb774c.jpgThe heat sinks didn't really go with my overall theme so we are going to paint them Pink. First I taped the Contact Points of the Heatsinks.

DSCF1523_zps09c68be4.jpgThen we shot them with Etching Primer

DSCF1527_zps6ac86ea0.jpgAnd then with Krylon Floresent Pink.

DSCF1534_zps51c70a3e.jpg

There we go much better.

DSCF1535_zps07b5d259.jpgHere is a look at the UV color change effect. the Pink turns Bright Orange :D

DSCF1537_zpsa95de23e.jpgUsed a double sided male coupler between the Phobya 400 Pump and the Primochill CTR

DSCF1539_zps8c9b3a2a.jpgLike so

DSCF1541_zpsbf382e54.jpgPrepping the Fans for there Pink Doom :P

DSCF1542_zpseec545aa.jpg

Since you can't use regular spray paint on Plastic We first used Krylon Fusion in white as a primer and will be shooting the Pink over that for all the Plastic parts.

DSCF1544_zps187701be.jpgDSCF1546_zpsfe4c2d31.jpg

DSCF1548_zps0b92a196.jpgThe Phobya 400 Pumps is going to get the same treatment.

DSCF1550_zps9ad0b20e.jpg

DSCF1552_zpsf591cc9b.jpg

DSCF1555_zps53ffa4b8.jpgThis is the case we will be using in our build. a CoolerMaster HAF 922..We are going to be cutting a full window, Trimming the 5.25" Drive cage down from 5 slots to 2, Removing the HDD cage. And paint the Motherboard Tray, whats left of the 5.25 Drive cage, I/O plate and front panel mesh Pink.

Alright and I'm back

DSCF1559_zps1b2b5d79.jpg

and shes Naked!!!! Time to pop some Rivets

DSCF1560_zps5018e640.jpg

Ok we removed the IO/Expansion slot plate, Motherboard Plate, HDD cage(went in the trash) and 5.25" drive cage

DSCF1564_zps10c1bc6a.jpg

Some White Primer on the IO/Expansion Plate

DSCF1565_zps14b2469f.jpg

DSCF1569_zps8a0445bf.jpg

First Coat of Primer on the Mobo plate

DSCF1571_zpsb2aed213.jpg

Measuring up for the Side Panel Window cut.

DSCF1580_zps74d9937b.jpg

Always use an Awl or old screwdriver thats been stripped to mark your drill holes to keep your drill from walking

DSCF1581_zpsfb8f91be.jpg

We wanted rounded corners so we are going to use a drill for the corners

DSCF1599_zps5f16192d.jpg

Ok most use a Dremel or a Jigsaw. I prefer my 90,000 RPM air powered cut off wheel

DSCF1597_zpsf9032000.jpg

Same this was use to trim down the 5.25" drive bat from 5 to 2 slots

Let The Pinking Begin

DSCF1572_zps0df41b00.jpg

DSCF1578_zpsf36a9de3.jpg

DSCF1585_zpsfde5ae4a.jpg

Pops shooting the second coat of Pink

Alright the first set of Icemodz cables are here

Here is a Link to the Unboxing Video we did for them. http://www.youtube.com/watch?v=JfUj9sFNxs0

ICEMODSCables-2_zpsb75bbfc2.jpg

Man thats a bright Pink.

DSCF1601_zps758cc1dc.jpg

Alright so I ordered some Pink Di-noc and some Mirrored Pink Film for the CPU Block and the Lamptron FC-2 Fan Controller we will be using

DSCF1602_zpse6d15f16.jpg

Here is the Water Block will be using for the CPU its an older OCZ Hydroflow from about 2009

DSCF1603_zpsf9e75168.jpg

Wrapped the Chrome Portion of the CPU Block in the Pink Mirrored Vinyl

DSCF1640_zps6508e5c1.jpg

Got the Case riveted back together and the ASRock Z77 Board with our OCZ Block on there not too shaby!!

DSCF1642_zps5e66e1b6.jpg

Got a first Radiator Installed the XSPC 240mm Rad in the Front where the HDD cage Had formerly been.

DSCF1643_zpsd2eceb07.jpg

The Primochill 120 CTR UV Pink Res and Phobya pump in there

DSCF1648_zps55720e5b.jpg

Ok not to crazy about the Pink Mirrored Vinyl going to try the Pink Di-Noc

DSCF1649_zps5a779e0e.jpg

DSCF1650_zpsc158adb0.jpg

DSCF1651_zps861feca4.jpg

And now for the Lamptron FC-2

DSCF1653_zps67b408aa.jpg

DSCF1655_zpsf380a2af.jpgDSCF1656_zpsb455fd38.jpg

DSCF1657_zpsed3f6015.jpg

DSCF1659_zps5409fc63.jpg

There Optical DRive is receiving the same treatment

DSCF1660_zps80620a0f.jpg

DSCF1661_zpse9c0d895.jpg

And I don't like it going to tear it off and paint them to match the rest of the front panel

DSCF1664_zps76e7a1c8.jpg

There much better

Front_zpsc99f7869.jpg

DSCF1665_zps23387bba.jpg

Found a cool Halloween decoration with Spiders on it and made it fit in the case. also just got the Primochill Advanced LRT Tubing UV Pink

DSCF1666_zps124ee9e7.jpg

Wrapped the PSU in Pink Di-Noc to Match the CPU

DSCF1675_zpsf599183d.jpg

Got the BSMODS 5050 RGB LED Strip installed This thing is awesome I highly suggest going to the site and getting a set http://www.bsmods.com/Mod_Shop.php

Also here is a short unboxing and demo video of the Product in action

http://www.youtube.com/watch?v=q4yVHRXeiHE

DSCF1677_zpsc42d6650.jpg

Ok we got her all tubed up going to be adding a second 240mm crossflow Rad to the top later

DSCF1680_zps6afa1275.jpg

Ok was thinking of sleeving these Front Panel Wires But I got a better Idea.

DSCF1682_zpsf64c64b7.jpg

I found some UV Pink 18g wire so I am going to change out all the FP wires to this wire

DSCF1685_zps1a73d13c.jpg

DSCF1686_zps074b4d1f.jpg

DSCF1689_zps15edf17b.jpg

Here is a look at the color change effect in the Black Light.

DSCF1723_zpsd71ac2eb.jpg

Got the 120Gb Kingston SSD Mounted behind the Mobo plate.

DSCF1731_zps4e5ef7c8.jpg

This is our Video Card EVGA GTX 550Ti. Going to be custom Painting it and the New Xigmatek PSU with a Spider Web Design

DSCF1733_zpse5422f38.jpg

DSCF1734_zpscd3e0c42.jpg

DSCF1735_zps04286439.jpg

DSCF1740_zpsdb683533.jpg

DSCF1741_zpseb82e357.jpg

DSCF1747_zps84c5ab4b.jpg

DSCF1736_zpsab241a1f.jpg

Xigmatek 700 watt PSU I picked up from PPC's on clearance for $25

DSCF1737_zpse27b58aa.jpg

DSCF1738_zpsf5807850.jpgDSCF1739_zps19a4ff76.jpgDSCF1746_zpsc9f84629.jpg

DSCF1752_zpsacc90115.jpg

DSCF1748_zps9762737a.jpg

DSCF1749_zps02c58c8a.jpg

Got the New Icemodz Custom Cables and UV LED Lights in there check out his site he does awesome work. http://www.icemodz.com/

Also here is another video of the unboxing and Demo of the lights Outside as well as Inside the case.

http://www.youtube.com/watch?v=fp4nYBbLdI0

Well thats it for now guys I'll install the Newly painted PSU when I get the second Rad, GPU Block and Flow Indicator in.

Feel Free to stop by the Dirty South PC Mods Facebook Group page and Terror-Byte Gaming Page

https://www.facebook.com/groups/DirtySouthPCmods/ https://www.facebook.com/TerrorBytegaming

BS MODS Facebook Page

https://www.facebook.com/bsmods

Icemodz Facebook Page

https://www.facebook.com/groups/Icemodz/

As well as our Youtube Channel for awesome Unboxings, Reviews, Game footage and more!!!!

http://www.youtube.com/channel/UCLECU0qhXsLMkSb_q

See you soon :)

Share this post


Link to post
Share on other sites

interested to see what you do here...my first mod was a haf 932, im currently doing a haf 912, and I was planning on either a haf 922 next or the haf xm 922 (the haf-x version). ill def be keeping up on this log to see how it goes

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...